RuB 135MF0 S.135 Manual/Actuatable Ball Valve, 3"
Brand NewNotification
WARNING: This product can expose you to chemicals including lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Manufacturer warranty Description
RuB, 135MF0, S.135 Stainless Steel Flanged Full Port Manual/Actuatable Ball Valve, 3"
Features:
- Quality:
- Anti-static device
- Locking device
- Long cycle life
- Test standard: API 598
- API 607 4th edition fire safe approval
- Vacuum service to 29" Hg
- Body:
- Body: ASTM A351 Gr. CF8M
- Stem:
- Blow-out proof stem design
- Adjustable stem packing
- Connections:
- ANSI B16.5, B16.10 and B16.34 full compliance
- Handle:
- Handle in ASTM A536 Gr. 65-45-12
- Warning: do not exceed reasonable temperature and/or electrical load
- Working pressure & temperature:
- General use: 750 PSI (see chart on reverse)
- 275 PSI for ASME 150 CF8M (see chart on reverse)
- Warning: freezing of the fluid in the installation may severely damage the valve
- Approved by or in compliance with GOST-R (Russia)
Note: approvals apply to specific configurations/sizes only.
Valve Parts:
- Body
- Cap
- Ball
- Stem
- Seat
- Gasket
- Thrust washer
- Packing
- Gland
- Stopper
- Snap ring
- Gland bolt
- Handle
- Locking plate
Torque Correction Factors:
Valve torque can vary according to the operating frequency, temperature, and friction characteristics of the media. If the media has more or less friction than water, multiply torque by the following factors.
Pressure-Temperature Chart:
Technical details
- Valve Size (in) 3
- Steam Rating 150 PSI WSP
- Torque for Actuator Sizing, in-lb Valve torque to open: 678.9 Valve torque to close: 678.9
- Lubricating Oils or Liquids 0.8
- Dry Gases, Natural Gas 1.5
- Slurries or Liquids Bearing Abrasive Particles 1.5/2.5
- Cv Factor 430
- Temperature Operation -50°F to +475°F
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.