Buy QSC unDX4I, Dante Network Audio Wall Plate 4x2 Mic/Line I/O

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

QSC, unDX4I, Dante Network Audio Wall Plate 4x2 Mic/Line I/O (Attero Tech)

Features:

Dante Domain Manager ready
Four balanced XLR mic/line inputs
Two balanced line outputs on Phoenix depluggable connectors
PoE powered
Three software-adjustable input gains accommodate common line levels, phantom power and dynamic microphones.
+48 V phantom power per channel
Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design

Applications:

Hotel Ballrooms
Spas
Fitness Facilities
Convention Centers
Education
Conference Center

The unDX4I is a cost-effective multi-IO Dante™ network audio wall plate. The unDX4I features four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5cable. The unDX4I's size and IO density make it easy to put Dante connectivity wherever it's needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring.

Dimensions

For more information, please see pdf file Data Sheet and User Manual

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Technical Details

Reviews

Audio Inputs

Input types

4x XLR (balanced and RF filtered)

Gain

-18 dB, -3 dB, +25 dB and +40 dB, software selectable

Input impedance

>1.8 KΩ at any gain setting

Maximum input levels

+20 dBu at -18 dB gain,
+6 dBu at - 3 dB gain,
-23 dBu at +25 dB gain
-38 dBu at +40 dB gain

Phantom power

+48v, software selectable

Audio Outputs

Output type

Two balanced line level with automatic muting on loss of Dante signal on 3-pin depluggable Phoenix

Attenuation range

Software controlled volume (0 to -60 dB, 1 dB increments)

Output impedance

200 Ω balanced

Maximum output level

+20 dBu at 0 dB attenuation

Audio Input Performance

EIN

-115dBu

THD+N

<0.02% at 1kHz for all gain settings, inputsignal 3dB below maximum

Frequency response

20Hz – 20kHz, +/- 1dB (-18 and - 3 dB gain)
50Hz - 20kHz +/- 1dB (+25dB and +40dB gain)

Dante Network

Physical level

Standard ethernet

Connector

Single RJ-45

Cable quality

CAT-5e or better

Transmisssion speed

100 Mbps

Supported sample rates

44.1 kHz, 48 kHz

Minimum Dante network latency

1 ms

General

Dimensions (HWD)

4.2 x 3.5 x 2 in
(114.3 x 88.9 x 50.8 mm)

Weight

0.6 lb (.27 kg)

Operating temperature

0 to 40° C

Regulatory compliance

FCC CFR 47 Parts 15B Class A
ICES-003
CE (EN55022)
RoHS
REACH

Environmental

PoE

802.3af PoE PD compliant

Power consumption

< 5 W max

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Audio Inputs

Input types

4x XLR (balanced and RF filtered)

Gain

-18 dB, -3 dB, +25 dB and +40 dB, software selectable

Input impedance

>1.8 KΩ at any gain setting

Maximum input levels

+20 dBu at -18 dB gain,
+6 dBu at - 3 dB gain,
-23 dBu at +25 dB gain
-38 dBu at +40 dB gain

Phantom power

+48v, software selectable

Audio Outputs

Output type

Two balanced line level with automatic muting on loss of Dante signal on 3-pin depluggable Phoenix

Attenuation range

Software controlled volume (0 to -60 dB, 1 dB increments)

Output impedance

200 Ω balanced

Maximum output level

+20 dBu at 0 dB attenuation

Audio Input Performance

EIN

-115dBu

THD+N

<0.02% at 1kHz for all gain settings, inputsignal 3dB below maximum

Frequency response

20Hz – 20kHz, +/- 1dB (-18 and - 3 dB gain)
50Hz - 20kHz +/- 1dB (+25dB and +40dB gain)

Dante Network

Physical level

Standard ethernet

Connector

Single RJ-45

Cable quality

CAT-5e or better

Transmisssion speed

100 Mbps

Supported sample rates

44.1 kHz, 48 kHz

Minimum Dante network latency

1 ms

General

Dimensions (HWD)

4.2 x 3.5 x 2 in
(114.3 x 88.9 x 50.8 mm)

Weight

0.6 lb (.27 kg)

Operating temperature

0 to 40° C

Regulatory compliance

FCC CFR 47 Parts 15B Class A
ICES-003
CE (EN55022)
RoHS
REACH

Environmental

PoE

802.3af PoE PD compliant

Power consumption

< 5 W max

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

QSC unDX4I Dante Network Audio Wall Plate 4x2 Mic/Line I/O

Identifiers

Technical Details

Reviews