Practical Instrument Electronics, Inc. (PIE) 820 Multifunction Process Calibrator, 6 Functions

Practical Instrument Electronics 820 Includes Only:

• Four"AA" Alkaline batteries
• Certificate of Calibration Dark Blue Rubber Boot
• Evolution Hands-Free Carrying Case Part
• Practical Instrument Electronics Multifunction Wire Kit
• 1 Red and 1 Black Lead with Banana Plug and Alligator Clips
• 2 Red and 2 Black Leads with Banana Plugs and Spade Lugs

Features:

• Lighten up your toolbox. Pocket-sized calibrator replaces the toolbox of single-function devices.
• Technician-friendly operation. The intuitive EZ-DIAL double cli-ck menu makes it easier to set up than other multifunction calibrators. Uses the same menus as the single function Practical Instrument Electronics Evolution calibrators. Icons on the display indicate where to plug in the test leads.
• Use it as a milliamp and voltage calibrator:
  • Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV
  • Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV
  • Simulate 2 Wire transmitters
  • Power up transmitters and loops with built-in 24 V power supply
  • Simplify HART hookups with a built-in 250-ohm resistor
• Calibrate directly in temperature (°C and °F):
  • The Practical Instrument Electronics 820 works with the instruments you use.
  • Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN), and P(Platinel II)
  • RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
  • Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
• Checkout flow and vibration systems:
  • Source and read frequency to 2000 CPM (Counts-Per-Minute), 999.99
  • Hz, 9999.9 Hz, 20.000 kHz
• Troubleshoot loop and wiring problems. Beep out connections with the built-in continuity checker.
• Easy to read. Turn on the backlight and easily see the display in dark areas of the plant.
• Quickly set any three outputs plus automatic stepping and ramping:
  • Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch.
  • Choose between 2, 3, 5, and 11 steps to automatically increment the output in 100%, 50%, 25%, or 10% of span.
  • Select RAMP to smoothly increase and decrease the output between Zero and Span.
  • Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30, and 60 seconds