PCE Instruments PCE-ND30 Power Meter 3.5" LCD

Brand: PCE Instruments

Part #:

PCE-ND30

Condition:

Brand New

Check availability

Manufacturer warranty

Description

PCE-ND30 Includes Only:

1 x Power Meter PCE-ND30 (in the selected configuration)
1 x Manual

Features:

Measurement of all parameters from a U / I network Measurement of harmonics up to 51th order
2 x PT100 input optional
RS485 Modbus
Alarm relay and analog output
Web interface and data memory optional
Panel mounting

The power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power meter PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced. All readings are displayed graphically on the display from the power meter. What measurement values are displayed, can be set by the user. This can be done in up to 10 groups with 8 measurement parameters. In addition to displaying the current measured values, the power display can also represent maximum and minimum values.

Two built-up relays can be used for alarming at reduced or crossing borders. Optionally, the user still a 0/4 ... 20 mA analog output and two inputs for PT100 temperature sensors. Also, the power meter can be equipped with an 8 GB memory and Ethernet interface. The network interface can be accessed on a web interface and the memory of the performance indicator. On delivery the RS485 Modbus interface is installed, on the power meter can be programmed and read.

Check availability

Technical details

Main features

Input 6 VA
Weight 300 g / 10.5 oz
Dimensions 96 x 96 x 77 mm / 3.7 x 3.7 x 3 in
Power Supply 85 ... 253 V AC 90 ... 300 V DC
Frequency 45 ... 65 Hz
Display 3.5 "LCD 320 x 240 pixels
Protection Front: IP65 connection side: IP20
Pollution Degree 2
Operating Position Each
Operating Conditions -10 ... 55 ° C / 0 ... 95% rh
Overload Voltage: 2 x Un (5 seconds), current: 50 A (1 second).
Power Loss Voltage side: 0.2 VA current side: 0.1 VA
Electromagnetic compatibility EN 61000-6-2 EN 61000-6-4
Panel Cutout 92.5 x 92.5
Heating Time 5 minutes
Power (Class 0.2) 1 A AC: 0.1 ... 1.2 A 5 A AC: 0.5 ... 6.0 A max. Display Area: 20 kA
Voltage LN (Class 0.2) 57.7 V AC: 11.5 ... 70 V 230 V AC: 46 ... 276 V 400 V AC: 80 ... 480 V max. Display area: 480 kV
Voltage LL (Class 0.5) 100 V AC: 20 ... 120 V 400 V AC: 80 ... 480 V 690 V AC: 138 ... 830 V max. Display area: 830 kV
Active Power (Class 0.5) ± 1999.9 W max. Display range: ± 1999.9 MW
Reactive power (Class 1) ± 1999.9 Var max. Display range: ± 1999.9 MVar
Apparent power (Class 0.5) 0 ... 1999.9 Va max. Display range: 0 ... 1999.9 MVA
Active energy (Class 0.5) ± 1999,9Wh max. Display range: ± 1999.9 MWh
Reactive energy (class 1) ± 1999.9 Varh max. Display range: ± 1999.9 Mvarh
Apparent energy (Class 0.5) 0 ... 1999 VAh max. Display range: 0 ... 1999.9 MVAh
Active power factor -1 .... 1
Action bill money -1.2 ... 1.2
Harmonic distortion / Harmonic Distortion 0 ... 100%
Harmonics voltage and current up to 51. order 0 ... 100%
Temperature input (optional) 2 x 2-wire PT100 -50 ... 400 ° C / -58 ... 752 ° F ± 0.5% v. MB.
RS485 interface Modbus RTU 8N2, 8E1, 8O1, 8N1 address: 1 ... 247 Baud rate: 4800, 9600.19200, 38400, 57600, 115200
Ethernet 10/100 Protocols: TCP, HTTP. FTP
Housing insulation Double to EN61010-1
Insulation Category III