PCE Instruments PCE-DC2-ICA Digital Voltmeter for AC/DC Current

Brand: PCE Instruments

Part #:

PCE-DC2-ICA

Condition:

Brand New

Check availability

Manufacturer warranty

Description

PCE-DC2-ICA Includes Only:

1 x PCE-DC2 Clamp on tester
2 x Measurement cables
1 x Bag
2 x Batteries
1 x User's manual
1 x ISO Calibration Certificate

Features:

LCD with 3-2/3 positions, backlit, clamp for continuous current
Measures AC/DC current, AC voltage and ohms
Memory function, zero reset for the DCA, test voltage without contact
Illumination of the point of measurement
Automatic range selection
Auto shut-off
Aperture of the clamp: 18 mm / .7 in

Clamp on tester for measuring AC/DC current incl. ISO Calibration Certificate, AC voltage and resistance,with a maximum aperture of 18 mm (.7 in)The PCE-DC1 clamp on tester has been designed to detect, indirectly, AC/DC current and ohms. The clamp has white LEDs integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlit display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. Testing voltage without contact helps when detecting dangerous power lines, and it allows makes it easier to detect the location of cuts in power lines.

Check availability

Technical details

Main features

Weight 175 g / 6.17 oz
Dimensions 164 x 65 x 32 mm / 6.45 x 2.56 x 1.26"
Power Supply 2 x 1.5 V AAA batteries
Accuracy +-(2.5 % + 8 digits), +-(2.0 % + 5 digits), +-(1.0 % + 2 digits), +-(1.5 % + 8 digits)
Measuring Range 0 - 200.0 A, 0 - 600.0 V, 0 - 999.9
Standards CAT III 600 V, CAT IV 300 V
Display LC display with backlight
Resolution 0.1, 0.1 A, 0.1 V
Storage Conditions -30 - 60 °C / -14 - 140 °F, max. 10,000 m / 32,808 ft above sea level
Operating Conditions -10 - 50 °C / 14 - 122 °F, max. 3000 m / 9842 ft above sea level
Measurement Rate 10 Hz for the reading 40 Hz for the bar graph at DC, DC voltage and resistance measurement
Input Impedance 1.0 M when measuring the voltage
Automatic Shutdown After 10 minutes without operation
Ambient Humidity max. 90 % (0 - 30 °C / 32 - 86 °F)
Continuity test <30, test current <0.5 mA
Current Clamp Opening 18 mm / 0.7"
Battery Indicator "BAT" low battery indicator
Peak measurement response time <10 ms(PEAK Hold)
Degree of pollution 2
Measuring range exceeded "OL" display when measuring range is exceeded
Response time of the largest and smallest measured value (MAX / MIN hold) <50 ms
(RH, non-condensing) max. 75 % (30 - 40 °C / 86 - 104 °F) max. 45 % (40 - 50 °C / 104 - 122 °F)