PCE Instruments PCE-CT 100N Coating Thickness Gauge with 2 Probes
Brand New
Manufacturer warranty Description
PCE-CT 100N Includes Only:
- 1 x Automotive tester PCE-CT 100N
- 1 x NFe probe
- 1 x Fe probe
- 1 x USB data carrier
- 1 x Reference film set
- 1 x Calibration plate (ferrous)
- 1 x Calibration plate (non-ferrous)
- 2 x 1.5V AA batteries
- 1 x Instruction manual
Features:
- Illuminated touch keyboard
- Measurement data storage for up to 500 data
- One-point and multi-point calibration
- Single measurement and continuous measurement
- Data transfer via wifi and USB
- Two different probes for NFe and Fe
The surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials. The surface tester is used to measure the thickness of magnetically neutral layers on a magnetic or non-magnetic base material. The surface tester is ideal for reliable layer thickness measurements on-site. With the external probe, the layer thickness can be measured quickly and easily, even in hard-to-reach places. The surface tester was developed for non-destructive, fast, and precise layer thickness measurements and is easy to use. Measured data can be easily transferred to a PC using a USB data storage device or via WiFi. The surface tester is used in particular in the finishing industry, electroplating, ship and bridge construction, aircraft construction, and the machine and chemical industry.
Technical details
- Weight Approx. 335 g / < 1 lb (with battery)
- Dimensions 170 x 85 x 35 mm / 6.7 x 3.3 x 1.4 in
- Accuracy ± (1% + 1 µm); ± (1% + 0.04 mil)
- Calibration Single point, multiple point
- Range 0 - 1250 micron
- Measuring Range 0 - 1250 µm; 0 - 49.2 mil
- Resolution 0.1 µm (<99.9 µm); 0.004 mil (<3.9 mil) 1 µm (> 100 µm); 0.04 mil (> 3.9 mil)
- Interfaces Wifi , USB
- Data Storage 500 data
- Operating Conditions 0 - 50°C / 32 - 122°F, 20 - 90% RH non-condensing
- Measuring Modes Single measurements, continuous measurement
- Min. Coating Thickness of Base Material 50 µm
- Smallest Measuring Surface (Diameter) 10 mm
- Min. Radius of Curvature Convex 15 mm
- Min. Radius of Curvature Concave 15 mm
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.