PCE Instruments PCE-830-2 Three-Phase Power Meter, 1000 A
Brand New
Manufacturer warranty Description
PCE Instruments, PCE-830-2, Three-Phase Power Meter, Data Logger, 1000 A
PCE-830-2 Includes Only:
- 1 x PCE-830-2 Power Meter
- 3 x Amp clamps (PCE-6802)
- 4 x Alligator clips
- 4 x Safety test lines (3 m / 3.3 ft long)
- 8 x Batteries
- 1 x Mains adaptor
- 1 x Carrying case
- 1 x USB cable software
- 1 x User's manual
Features:
- Analysis of a network of 3 phases / 4 conductors, 3 phases / 3 conductors, 1 phase / 2 conductors, 1 phase / 3 conductors
- Measures effective real value (V 123 and I 123)
- Measures active power (W, KW, MW, GW)
- Measures apparent and reactive power (KVA, KVAR)
- Power Factor (PF), phase angle (Φ)
- Measures energy and work (Wh, KWh, KVARh, PFh)
- Measures current from 0.1 mA to 3000 A, allowing for the reserve power of a factory to be determined
- Large LCD that shows up to 35 parameters simultaneously (3P4W [=3 phases/4 conductors])
- CT conditions (1 to 600) and PT (1 to 3000) are programmable
- Indicates current waveforms and voltage overlap.
- 512 KB of memory with programmable intervals to save data every 2 to 3000 seconds, 17,470 readings using the system of 3 phases / 4 conductors
- Indicates waveforms, efficiency parameters, and harmonic distortion
- Backlit LCD with dot-matrix
- Average power (AD in W, KW, MW)
- Maximum power (MD in W, KW, MW) with the programmable period
- Analysis of harmonic distortion up to curvature of 99
- Indication of up to 50° form of harmonic wave
- Indication of the waveform with maximum value (1024 readings/period)
- Analysis of absolute distortion (%THD-F)
- Diagram of graphic equilibrium with parameters of a 3 phase system
- Detects up to 28 transistors (time and cycles) with a programmable threshold (%)
- Relation of 3 phases of voltage or asymmetrical current (VUR)
- The factor of 3 phases of voltage and asymmetrical current (d0%, d2%)
- USB port
- Integrated timer and calendar to record data
- Maximum diameter of the electrical conductor for the amp clamp: the PCE-6801 ~30 mm / 1.2 in, PCE-6802 ~55 mm / 2.2 in, PCE-3007 ~170 mm / 6.7 in
The PCE-830 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetries. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The backlit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Power Meter. In data logger mode, it can save up to 17,470 readings (3 phases / 4 conductors), in a simpler setup (1 phase / 2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the PCE-830 Power Meter the ideal instrument for taking measurements over long durations. Measurement values obtained can be sent to a computer and be processed with the included analysis software. The device comes with everything needed to be measured and analyzed from the moment it arrives.
Technical details
- Power 8 AA batteries (Mignon)
- Weight 1.16 kg / 2.56 lbs
- Dimensions 257 mm x 155 mm x 57 mm 10.1 in x 6.10 in x 2.24 in
- Package Included Power Meter with PCE-6802 Amp Clamp
- Display Backlit LCD with dot-matrix
- Memory 512 kB for a maximum 52,420 readings taken by 1 phase / 2 conductors
- Port USB
- Total Harmonic Distortion 0.0 to 20.0% / 0.1% / ±2% 20.0% to 100% / 0.1% / ±6% of reading ±1% 100% to 999.9% / 0.1% / ±10% of reading ±1%
- Operating Conditions max. 85% relative humidity -10° C to 50° C / 14° F to 122° F
- Watts AC (50 Hz or 60 Hz, PF 0.5 up to 1) 5.0 W to 999.9 W / 0.1 W / ±1% ±0.8 W 1.000 kW to 9.999 kW / 0.001 kW / ±1% ±8 W 10.00 kW to 99.99 kW / 0.01 kW / ±1% ±80 W 100.0 kW to 999.9 kW / 0.1 kW / ±1% ±0.8 kW 1000 kW to 9999 kW / 1 kW / ±1% ±8 kW 0.000 MW to 9.999 MW / 0.001 MW / ±1% ±80 kW
- Current AC (50 Hz or 60 Hz, Auto Range Select, TRMS) 10.00 A / 0.01 A / 4 A to 100.0 A / 0.01 A / ±0.5% ±0.5 A 40 A to 1000.0 A / 0.1 A / ±0.5% ±5 A
- Voltage AC (50 Hz or 60 Hz, TRMS) 20.0 V - 500.0 V / 0.1 V / ±0.5 % ±5 digits (grounded) 20.0 V - 600.0 V / 0.1 V / ±0.5 % ±5 digits (phase to phase)
- Harmonic distortionof AC Voltage 1° to 20° / 0.1% / ±1.0% 21° to 49° / 0.1% / 4% of reading ±2.0% 50° to 99° / 0.1% / 6% of reading ±2.0%
- Harmonics of AC Current in % 1° to 10° / 0.1% / ±2% 21° to 49° / 0.1% / 4% of reading ±2.0% 50° to 99° / 0.1% / 6% of reading ±2.0%
- Power Factor (PF) 0.00 to 1.00 / 0.01 / ±0.04
- Phase Angle (Phi) -180° to 180° / 0.1° / ±1°
- Maximum Measurement of AC Voltage and Current 50 Hz / 19 µS / ±5% ±30 digits 60 Hz / 16 µS / ±5% ±30 digits
- Peak Value Measurement of AC Voltage and Current 1.00 to 99.99 / 0.01 / ±5% ±30 digits
- The Frequency Range in Automatic Mode 45 Hz to 65 Hz / 0.1 H z / 0.1 Hz
- Software and Cable Yes, for Windows 2000, XP, ME
- Type of Protection / Standards IEC 61010, 600 V/CAT III
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.