Moxa NPort 5430 Ethernet Device Server, RS-422/485
Brand New
Manufacturer warranty Description
Moxa, NPort 5430, 4-Port 10/100M Ethernet Device Server, RS-422/485
Features:
- User-friendly LCD panel for easy installation
- Adjustable termination and pull high/low resistors
- Socket modes: TCP server, TCP client, UDP
- Configure by Telnet, web browser, or Windows utility
- SNMP MIB-II for network management
- 2 kV isolation protection for NPort 5430I/5450I/5450I-T
- -40 to 75°C operating temperature range (-T model)
NPort® 5400 device servers provide many useful features for serial-to-Ethernet applications, including an independent operation mode for each serial port, user-friendly LCD panel for easy installation, dual DC power inputs, and adjustable termination and pull high/low resistors.
Network Readiness for up to 4 Serial Devices
NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
User-friendly LCD Panel for Easy Installation
An LCD panel is built into the NPort® 5400's top panel, with four buttons for data input, configuration, and operation mode selection. The LCD panel displays the server name, serial number, and IP address, and it can be used to enter or modify parameters such as IP address, netmask, and gateway.
Dual DC Power Inputs
NPort® 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power inputs gives users greater flexibility for use with different applications.
Adjustable Termination and Pull High/Low Resistors
The NPort 5400 Series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort® 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.
Technical details
- Configuration Telnet Console Windows Utility Web Console (HTTP/HTTPS)
- Connector Terminal block
- Weight 740 g (1.63 lb)
- Input Voltage 12 to 48 VDC, 24 VDC for DNV
- Standards Telcordia (Bellcore) Standard TR/SR
- Number of Ports 4
- Installation Desktop DIN-rail mounting Wall mounting
- Filter IGMP v1/v2
- Housing Metal
- Baud Rate Supports standard Baud Rates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
- Operating Temperature 0 to 55°C (32 to 131°F)
- Power Connector 1 removable 3-contact terminal block(s) Power input jack
- EMC EN 55032/35
- Safety UL 62368-1
- Input Current 320 mA at 12 VDC
- Management ARP BOOTP DHCP Client DNS HTTP HTTPS ICMP IPv4 LLDP Rtelnet SMTP SNMPv1/v2c TCP/IP Telnet UDP
- Operation Modes Real COM TCP Server TCP Client UDP Ethernet Modem Pair Connection Reverse Telnet Disabled
- Parity None, Even, Odd, Space, Mark
- Stop Bits 1, 1.5, 2
- Time 826,688 hrs
- Data Bits 5, 6, 7, 8
- EMI CISPR 32, FCC Part 15B Class A
- EMS IEC 61000-4-2 ESD: Contact: 6 kV Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11
- Ambient Relative Humidity 5 to 95% (non-condensing)
- Encryption HTTPS AES-128 RSA-1024 SHA-1 SHA-256
- Serial Standards RS-422 RS-485
- RS-422 Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w Data+, Data-, GND
- Arm-based Platform Support Linux Kernel 5.x/4.x
- Virtual Machine VMWare ESXi (Windows 11 / 10) VMware Fusion (Windows on macOS 10.12 to 11.x) Parallels Desktop (Windows on macOS 10.12 to 11.x)
- Android API Android 3.1.x and later
- Storage Temperature (package included) -40 to 75°C (-40 to 167°F)
- 10/100BaseT(X) Ports (RJ45 Connector) 1
- Magnetic Isolation Protection 1.5 kV (built-in)
- Dimensions (with ears) 181 x 103 x 33 mm (7.14 x 4.06 x 1.30 in)
- Dimensions (without ears) 158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in)
- Maritime DNV
- Windows Real COM Drivers Windows 11/10/8.1/8/7/Vista/XP/ME/98/95 Windows Server 2022/2019/2016/2012 R2/2012/2008 R2/2008/2003/2000/NT Windows Embedded CE 5.0/6.0, Windows XP Embedded
- Linux Real TTY Drivers Kernel versions: 6.x, 5.x, 4.x, 3.x, 2.6.x, and 2.4.x
- Fixed TTY Drivers macOS versions: 10.12 to 10.15, 11.x SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
- Authentication Local database
- Number of Power Inputs 2
- Security Protocols HTTPS (TLS 1.2) SNMPv3
- Automatic Reboot Trigger Built-in WDT
- Time Management SNTP
- Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
- RS-485 Data Direction Control ADDC (automatic data direction control)
- Alert Tools Built-in buzzer and RTC (real-time clock)
- Interactive Interface LCD panel display Push buttons for configuration
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.