WLAN Interface |
WLAN Standards | - 2.4 GHz: 802.11b/g/n with 256 QAM support
- 5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support
|
Frequency Band for US (20 MHz operating channels) | - 2.412 to 2.462 GHz (11 channels)
- 5.180 to 5.240 GHz (4 channels)
- 5.745 to 5.825 GHz (5 channels)
- 5.500 to 5.700 GHz (11 channels)(DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.),
- 5.260 to 5.320 GHz (4 channels)(DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.)
|
Wireless Security | - WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
- WPA/WPA2/WPA3-Personal
|
Transmission Rate | - 2.4 GHz:
- 802.11b: 1 to 11 Mbps
- 802.11g: 6 to 54 Mbps
- 802.11n: 6.5 to 400 Mbps
- 5 GHz:
- 802.11a: 6 to 54 Mbps
- 802.11n: 6.5 to 300 Mbps
- 802.11ac: 6.5 to 867 Mbps
|
Transmitter Power for 802.11a (Dual Chain) | - 25±11.5 dBm at 6 Mbps
- 23±11.5 dBm at 54 Mbps
|
Transmitter Power for 802.11n (5 GHz, Dual Chain) | - 25±11.5 dBm at MCS0 20 MHz
- 22±11.5 dBm at MCS7 20 MHz
- 24±11.5 dBm at MCS0 40 MHz
- 22±11.5 dBm at MCS7 40 MHz
|
Transmitter Power for 802.11ac (Dual Chain) | - 25±11.5 dBm at MCS0 20 MHz
- 22±11.5 dBm at MCS8 20 MHz
- 24±11.5 dBm at MCS0 40 MHz
- 21±11.5 dBm at MCS9 40 MHz
- 23±11.5 dBm at MCS0 80 MHz
- 20±11.5 dBm at MCS9 80 MHz
|
Transmitter Power for 802.11b (Dual Chain) | - 29±11.5 dBm at 1 Mbps
- 29±11.5 dBm at 11 Mbps
|
Transmitter Power for 802.11g (Dual Chain) | - 29±11.5 dBm at 6 Mbps
- 26±11.5 dBm at 54 Mbps
|
Transmitter Power for 802.11n (2.4 GHz, Dual Chain) | - 28±11.5 dBm at MCS0 20 MHz
- 25±11.5 dBm at MCS7 20 MHz
- 28±11.5 dBm at MCS0 40 MHz
- 25±11.5 dBm at MCS7 40 MHz
|
Receiver Sensitivity for 802.11a (measured at 5.680 GHz) | - Typ. -89 at 6 Mbps
- Typ. -72 at 54 Mbps
|
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) | - Typ. -89 dBm at MCS0 20 MHz
- Typ. -69 dBm at MCS7 20 MHz
- Typ. -85 dBm at MCS0 40 MHz
- Typ. -66 dBm at MCS7 40 MHz
|
Receiver Sensitivity for 802.11ac | - Typ. -88 dBm at MCS0 20 MHz
- Typ. -65 dBm at MCS8 20 MHz
- Typ. -85 dBm at MCS0 40 MHz
- Typ. -60 dBm at MCS9 40 MHz
- Typ. -81 dBm at MCS0 80 MHz
- Typ. -55 dBm at MCS9 80 MHz
|
Receiver Sensitivity for 802.11b (measured at 2.437 GHz) | - Typ. -96 dBm at 1 Mbps
- Typ. -88 dBm at 11 Mbps
|
Receiver Sensitivity for 802.11g (measured at 2.437 GHz) | - Typ. -90 dBm at 6 Mbps
- Typ. -74 dBm at 54 Mbps
|
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) | - Typ. -90 dBm at MCS0 20 MHz
- Typ. -70 dBm at MCS7 20 MHz
- Typ. -87 dBm at MCS0 40 MHz
- Typ. -69 dBm at MCS7 40 MHz
|
WLAN Operation Mode | - Client
- Client-Router
- Slave
- Sniffer
|
Antenna | - External, 2/2 dBi
- Omni-directional
|
Antenna Connectors | 2 RP-SMA female |
Ethernet Interface |
Standards | - IEEE 802.3 for 10BaseT
- IEEE 802.3u for 100BaseT(X)
- IEEE 802.3ab for 1000BaseT(X)
- IEEE 802.3az for Energy-Efficient Ethernet
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1X for authentication
|
10/100/1000BaseT(X) Ports (RJ45 Connector) | 1 |
Ethernet Software Features |
Management | - DHCP Server
- DHCP Client
- DNS
- HTTP
- IPv4
- LLDP
- SMTP
- SNMPv1/v2c/v3
- Syslog
- TCP/IP
- Telnet
- UDP
- VLAN
- MXconfig
|
Routing | - Port forwarding
- Static Route
- NAT
|
Security | - HTTPS/SSL
- RADIUS
- SSH
- Certificate Management
|
Time Management | SNTP Client |
Firewall |
Filter | - ICMP
- MAC address
- IP protocol
- Port-based
- Client Isolation
- Wi-Fi ACL
|
Serial Interface |
Console Port | RS-232x8-pin RJ45 |
USB Interface |
Storage Port | USB Type A |
LED Interface |
LED Indicators | PWR, WLAN, SYSTEM |
Input/Output Interface |
Buttons | Reset button |
Physical Characteristics |
Housing | Metal |
IP Rating | IP30 |
Dimensions | 100 x 130 x 22 mm (3.94 x 5.12 x 0.87 in) |
Weight | 436 g (0.96 lb) |
Installation | - DIN-rail mounting
- Wall mounting
|
Power Parameters |
Input Current | 9 to 30 VDC, 1.57 to 0.47 A |
Input Voltage | 9 to 30 VDC |
Power Connector | 1 removable 3-contact terminal block(s) |
Power Consumption | 14 W (max.) |
Environmental Limits |
Operating Temperature | -25 to 60°C (-13 to 140°F) |
Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications |
EMC | - EN 61000-6-2/-6-4
- EN 55032/35
|
EMI | CISPR 32, FCC Part 15B Class A |
EMS | - IEC 61000-4-2 ESD: Contact: 8 kV
- Air: 15 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
- IEC 61000-4-4 EFT: Power: 2 kV
- Signal: 1 kV
- IEC 61000-4-5 Surge: Power: 2 kV
- IEC 61000-4-6 CS: 10 V/m
- IEC 61000-4-8 PFMF: 30 A/m
|
Road Vehicles | E mark E1 |
Safety | - IEC 60950-1
- IEC 62368-1
- UL 62368-1
|
Vibration | IEC 60068-2-6 |
Radio | EN 300 328, EN 301 489-1/17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC |
MTBF |
Time | 1,144,888 hrs |
Standards | Telcordia SR332 |