Meg-Alert, GP2500-CG-AS-D1, CableGuard Automatic Cable Circuit Insulation Tester Kit with Digital Switchboard Meter, 2500 VDC
GP2500-CG-AS-D1 Includes Only:
- 15 KV internal isolation relay
- GP7000-D1 digital switchboard meter
- GP8012-MU-AS remote LED four (4)/switch assembly
- GP10016 HV fuse block assembly
- GP10025 HV test lead assembly
Features:
- Auto/Manual test operation
- Adjustable alarm and pre-alarm set points
- Latching alarm contacts with manual reset
- Pre-alarm contacts with auto reset
- Full 2500 VDC test voltage
- Fused input and HV test lead
- 15 ft. two-way current-limited H.V. test lead w/plug
- Non-corrosive, lightweight enclosure
- Remote Calibration and system test switch
- Long-life, flashing remote LED/switch assembly w/15 ft. cable
- 1% Panel meter with 4" color-coded dial
- Test lead with current limit resistor - 15' length
Applications:
- Shore power cables
- Shore power plugs and receptacles
- Power feed cables and busses
- Distribution/isolation transformers
Automatic Insulation Resistance Tester that monitors and protects critical-duty cable and transformer circuits.
Operation
CableGuard applies a current-limited, fixed DC voltage to the cable circuit during idle periods. A solid-state comparator circuit monitors measured leakage current to the ground. Two adjustable set points, factory preset to customer specifications, can be programmed to signal a pre-alarm, alarm, and lockout the equipment from operating if the low set point is exceeded. The manual reset feature enables a return to operational status only after the alarm condition has been corrected. CableGuard will not impair the normal operation of the equipment being monitored.
