Brand NewThis product will be drop-shipped directly from the manufacturer. We will provide you with the manufacturer's lead time once advised.
LMI, AD252-930AI, Metering Pump, 1.0 GPH, Dual Manual Control, O-Ring Polyprel, Acrylic/PVC, AutoPrime Head, 220-240V US Plug
The AD2 series metering pump has a liquid crystal display to indicate pump stroke speed and theoretical flow rate. Applicable for specific chemical pumping application. Control and adjustment for stroke frequency shall be by means of a tactile keypad. Adjustment for stroke length shall be by means of a readily accessible dial knob. A pulse indicator light shall flash green between strokes when pumping. The pump shall be equipped with an on/off button and a low level float switch Input. When the low level sensor registers empty, the low level indicator light shall turn red and the pump shall turn off when it registers an empty level.
AutoPrime™ liquid ends have 3 check valves: suction on the bottom; discharge on the front; auto prime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding. Depending on application, output may be reduced up to 50%.
AD252-930AI Includes Only:
Features:
Pump Drawing

LMI recommends flooded suction installations for all high-viscosity fluid applications.

The pump may be mounted maintaining a suction lift of less than 5 ft (1.5 m).

There are currently no reviews for this product. You can leave the first review and share your experience.