Koch Filter 102-499-005 Multi-Pleat 15 x 20 x 1" Panel Filter

Koch Filter, 102-499-005, Multi-Pleat 15x20x1" Standard Capacity MERV 11 Extended Surface Pleated Panel Filter

Features:

• Upgrade from the standard pleated filter
• MERV 11 rating
• Dual-Layered filter media
• Low-pressure drop
• High dust-holding capacity
• Superior Efficiency

The Koch Multi-Pleat XL11 is a medium-efficiency extended surface pleated panel filter, engineered to provide higher initial efficiencies and better overall performance than standard pleated filters. The Multi-Pleat XL11 carries a MERV 11 fractional efficiency rating in accordance with ASHRAE Test Standard 52.2. The filter will also provide an Initial Dust Spot Efficiency of 45%, and an Average Dust Spot Efficiency of 55-60% in accordance with ASRAE Test Standard 52.1. The MERV 11 efficiency ratings provided by the Multi-Pleat XL11 make the filter an excellent upgrade from disposable filters and ordinary pleated filters in applications such as hospitals, laboratories, and pharmaceutical environments.

Multi-Pleat XL11 Construction

The Multi-Pleat XL11 is produced with a highly specialized, dual-layered 100% synthetic media, developed by Koch Filter specifically for use in extended surface air filters. The media is composed of an upstream electrostatically enhanced layer (the E-layer), and a downstream mechanical layer (the M-layer). The dual-layered construction of Multi-Pleat Series XL11 overcomes a common problem found in single-layered electrostatically charged filters. In filters produced with single-layered media, the effectiveness of the electrostatically charged media decreases over time as the filter becomes dirty and the charge dissipates. As the effectiveness of the electrostatically enhanced E-layers decreases, the downstream mechanical M-layer takes over.

Media Area Capacity Level

Standard Capacity XL11 filters provide a combination of efficiency, economy, and excellent overall performance. Standard Capacity XL11 filters are an excellent choice in applications where filter change schedules are based on preventive maintenance schedules.

Initial Resistance vs. Air Flow Rate:

Efficiency by Particle Size:

Engineering Specifications:

• General Specifications
  • Filters shall be Multi-Pleat XL11 extended surface pleated air filters as manufactured by Koch Filter.
  • Filters are classified by Underwriters Laboratories to UL 900 and ULC-S111-07.
  • Filters are manufactured by an ISO 9001-registered company.
• Filter Material and Construction
  • Media shall be 100% synthetic mechanical media.
  • Filters shall have an expanded galvanized steel support grid bonded to the air-exiting side of the filter to maintain pleat uniformity and prevent fluttering.
  • The filter frame shall be comprised of a high wet-strength beverage board with a cross member designed to increase filter strength and rigidity. The frame shall be recyclable.
• Filter Performance
  • Filters shall be MERV 11 in standard capacity and high capacity configurations and when tested in accordance with the ASHRAE 52.2 Test Standard.
  • Filters shall be rated to withstand a continuous operating temperature of up to 200°F.
  • Filters shall have a recommended final resistance of 1.0" w.g.