Prime Buy
1-855-969-9322
1-908-282-3332 (Intl.)

Jensen Transformers DIN-2LI Dual 10k to 10k 1:1 Line Input Module

  • Condition
    Brand New
Availability
Typically In Stock
Check Availability
Quantity
Share:

The IsoMax DIN-2LI is a two-channel line input isolator designed to eliminate noise in professional balanced audio systems by isolating the input of the connected device. The design begins with 35 mm DIN rail molded in gray UL94-VO flame retardant Noryl format that snaps into place for easy installation in NEMA enclosure via a removable screw-down wire terminal. Plug and play easy to use, this passive interface does not require any power to work. Inside are two Jensen high-performance transformers that are able to withstand signal levels to +19 dBu at 20 Hz without discernible distortion. These provide galvanic isolation between the input and output to eliminate hum and buzz caused by ground loops, rejecting noise by as much as 124 dB. To further optimize the performance, a choice of connection point options enable the user to determine the most appropriate grounding scheme to suit the installation. You simply connect the DIN-2LI between the source and the input destination to eliminate ground loops, electromagnetic interference (EMI) and RFI problems. The DIN-2LI will quietly go to work without introducing distortion, phase shift or artifact of any kind.

Features:

  • Eliminates hum and buzz caused by ground loops
  • Delivers exceptionally low distortion down to 20 Hz
  • Ruler flat frequency response from 5 Hz to 40 kHz
  • Plug and play easy to use, no power required
See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Dealer
Manufacturer Warranty

Technical Details

Reviews
Conditions Input impedance, Zi1 kHz, +4 dBu, test circuit 1
Typical Input impedance, Zi14.1 kΩ
Conditions Voltage gain1 kHz, +4 dBu, test circuit 1
Typical Voltage gain-3.0 dB
Conditions Magnitude response, ref 1 kHz20 Hz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Magnitude response, ref 1 kHz-0.03 dB
Conditions Magnitude response, ref 1 kHz20 kHz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Magnitude response, ref 1 kHz-0.20 dB
Conditions Deviation from linear phase (DLP)20 Hz, 20 kHz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Deviation from linear phase (DLP)+1.4/-0
Conditions Distortion (THD)1 kHz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Distortion (THD)<0.001%
Conditions Distortion (THD)20 Hz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Distortion (THD)0.04%
Conditions Maximum 20 Hz input level1% THD, test circuit 1, Rs = 600 Ω
Typical Maximum 20 Hz input level+19 dBu
Conditions Output impedance, Zo1 kHz, test circuit 1, Rs = 600 Ω
Typical Output impedance, Zo3.2 kΩ
Product Details
Conditions Input impedance, Zi1 kHz, +4 dBu, test circuit 1
Typical Input impedance, Zi14.1 kΩ
Conditions Voltage gain1 kHz, +4 dBu, test circuit 1
Typical Voltage gain-3.0 dB
Conditions Magnitude response, ref 1 kHz20 Hz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Magnitude response, ref 1 kHz-0.03 dB
Conditions Magnitude response, ref 1 kHz20 kHz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Magnitude response, ref 1 kHz-0.20 dB
Conditions Deviation from linear phase (DLP)20 Hz, 20 kHz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Deviation from linear phase (DLP)+1.4/-0
Conditions Distortion (THD)1 kHz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Distortion (THD)<0.001%
Conditions Distortion (THD)20 Hz, +4 dBu, test circuit 1, Rs = 600 Ω
Typical Distortion (THD)0.04%
Conditions Maximum 20 Hz input level1% THD, test circuit 1, Rs = 600 Ω
Typical Maximum 20 Hz input level+19 dBu
Conditions Output impedance, Zo1 kHz, test circuit 1, Rs = 600 Ω
Typical Output impedance, Zo3.2 kΩ
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Prime Buy
1-855-969-9322
1-908-282-3332 (Intl.)