Inor 70ISL64100 IsoPAQ-641 High-Performance Isolation Transmitter
Condition: 
Brand New
Brand New $320.00 /Each
Manufacturer warranty Description
Features:
- Calibrated signal setting via DIP switch. Input and output range can be set by using DIP switch - high precision without any further adjustment
- 3-Port Isolation. Protection against erroneous measurements due to parasitic voltages or ground loops
- Extremely slim design. 6.2 mm slim housing for a simple and space saving DIN rail mounting
- Protective Separation acc. to EN 61140. Protects service personnel and downstream devices against impermissibly high voltage
- Maximum reliability. No maintenance costs
The Isolation Amplifier is used for isolation and conversion of 0/4 ... 20 mA and 0/2 ... 10 V standard signals.
The input and output range of it can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.
A green LED on the front of the unit has been provided to monitor the power supply.
For more information, please see 
Data Sheet
Technical details
Main features
- Weight approx. 70 g
- Power Supply 24 V DC voltage range 16.8 V ... 31.2 V, approx. 0.7 W
- Construction 62 x 96,5 x 107 mm , protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715
- Ambient Temperature Operation: - 25 °C to + 70 °C (- 13 to + 158 °F) Transport and storage: - 40 °C to + 85 °C (- 40 to + 185 °F)
- Temperature Coefficient < 100 ppm/K
- EMC EN 61326-1
- Input Resistance Current input ≤ 25 Ω Voltage input ≥ 100 kΩ
- Load Current output: ≤ 12 V (600 Ω at 20 mA) Voltage output: ≤ 5 mA (2 kΩ at 10 V)
- Test Voltage 3 kV AC, 50 Hz, 1 min. Input against output against power supply
- Overload Current input < 50 mA Voltage input < 30 V
- Linear transmission range -1 ... +110 %
- Residual ripple < 10 mV/rms
- Transmission error < 0.1 % full scale
- Cut-off frequency -3 dB 5 kHz, 100 Hz, 10Hz
- Working voltage (Basic insulation) 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1
- Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits
- Response time T 99 150 µs, 7 ms, 70 ms
- Input signal (calibrated switchable) 0 ... 20 mA, 4 ... 20 mA 0 ... 10 V, 2 ... 10 V
- Output signal (calibrated switchable) 0 ... 20 mA, 4 ... 20 mA 0 ... 10 V, 2 ... 10 V
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.