Inor 70ISL61200 IsoPAQ-612 2-Channel Loop Powered Isolator
Brand New
Manufacturer warranty Description
Features:
- Galvanic isolation across input and output. Protection against erroneous measurements due to parasitic voltages or ground loops
- No power supply required. Saving costs since wiring is reduced and line influences are omitted
- Extremely slim design. Only 3.1 mm DIN-rail per channel
- Protective Separation acc. to EN 61140. Protects service personnel and downstream devices against impermissibly high voltage
- Maximum reliability. No maintenance costs
The input loop-powered isolator provides galvanic separation for 0(4) ... 20 mA standard signals, while transferring the measurement signal to the output with a high degree of accuracy. The unit avoids interference voltage carry-over and effectively suppressing parasitic noise. The very low drop voltage of 2.3 V and the high level of accuracy work together to make It the first choice in system design. Intelligent design and their consequential avoidance of highly integrated components result in extremely long service lives and reliability - without any falsification of the measurement signal. It requires no additional power supply since the auxiliary power is obtained from the input signal without distorting it. This not only saves costs during installation, but also increases reliability.
For more information, please see 
Data Sheet
Technical details
- Weight approx. 70 g
- Output Signal 0(4)-20 mA
- Input Signal 0(4)-20 mA
- Channel 2-Channel
- Construction 62 x 96,5 x 107 mm , protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715
- Ambient Temperature Operation: - 25 to + 70 °C (- 13 to + 158 °F) Transport and Storage: - 40 to + 85 °C (- 40 to + 185 °F)
- Temperature Coefficient < 100 ppm/K
- EMC EN 61326-1
- Load 600 Ω
- Test Voltage 3 kV AC, 50 Hz, 1 min. all circuits against one another
- Overload ≤ 50 mA, 30 V
- Voltage drop Ca. 2.3 V at 20 mA
- Residual ripple < 10 mV/rms
- Transmission error < 0.1 % full scale
- Working voltage (Basic insulation) 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1
- Start-up current < 200 mA
- Load error < 0.05 % of measured value / 100 Ω load
- Protection against electrical shock Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits
- Response time T 99 5 ms
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.