$587.00 /Each
Manufacturer warranty Description
Features:
- Condition-based maintenance thanks to monitoring of imbalance, rolling element bearing or gear state
- Large operating temperature range and high protection rating for the requirements of harsh industrial environments
- Reliable and permanent monitoring of characteristic values incl. raw data acquisition
- Integration in Industrial Ethernet systems without control cabinet and complex wiring
- Asynchronous transmission of raw data (BLOB) and integrated operating hours counter
Applications
- Medium-sized machines
- Power<300 kW
- Rotational speed>600 rpm
For more information, please see 
Data Sheet
Technical details
Main features
- Material Housing: stainless steel (1.4404 / 316L)
- Accuracy ≤ 4 kHz +/-10 %; ≥ 4 - 10 kHz: <3 dB
- Application Medium-sized machines, power<300 kW, rotational speed>600 rpm
- Output Signal Switching signal; IO-Link
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 2
- Output Function Normally open / closed
- Electrical Design PNP/NPN; (configurable)
- Number of Measurement Axes 1
- Protection IP 67 IP 68 IP 69K
- Overload Protection Yes
- Short-circuit protection Yes
- Operating voltage [V] 18 - 30 DC
- Type of Mounting Set Screw
- Linearity deviation 2 %
- Reverse Polarity Protection Yes
- Measuring Principle Capacitive
- Frequency Range [Hz] 2 - 10000
- Current Consumption [mA] < 50
- Minimum Insulation Resistance [MΩ ] 100; (500 V DC)
- Type of sensor Microelectromechanical system (MEMS)
- Ambient Temperature [° C] -30 - 60
- Storage Temperature [° C] -30 - 80
- MTTF [Years] 299
- Weight [g] 116.5
- Tightening Torque [Nm] 8
- Number of Inputs and Outputs Number of Digital Outputs: 2
- Measuring range of vibration [mm/s] 0 - 45
- Maximum Voltage Drop Switching Output DC [V] 2
- Measuring Range [° C] -30 - 80
- Resolution [° C] 0.1
- Set point SP [° C] -28 - 80
- Reset point rP [° C] -30 - 78
- In Steps of [° C] 2
- Accuracy [K] ± 2,5 K + (0,2 x (Umgebungstemperatur - Oberflächentemperatur))
- Parameter Setting Software
- Transmission Type COM2 (38,4 kBaud); COM3 (230,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9: 2013-07
- Profiles Blob (0x0030); Measuring sensor (0x800A); Common Profile (0x4000)
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 10
- Process Data Binary 2
- Minimum Process Cycle Time [ms] 3.6
- Maximum Current Load per Output [mA] 100
- Type of Short-Circuit Protection Yes (non-latching)
- In steps of 1
- IO-Link Functions (Acyclical) Filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; Switch points; switching logic
- Diagnostic functions Self-test
- Measuring range of vibration 1 - 50, Application
- Set point SP [mm/s] 0.2 - 45
- Reset point rP [mm/s] 0 - 44.8
- In steps of [mm/s] 0.2
- Set point SP 2 - 50
- Reset point rP 1 - 49
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.