IFM TCC201 Temperature Transmitter with 550mm Installation Length
Condition: 
Brand New
Brand New $493.60 /Each
Manufacturer warranty Description
Features:
- Immediate notification of deviations in accuracy
- Improved quality assurance in between calibration intervals
- Robust design for permanently precise measurements even in demanding environments
- Transparent sensor monitoring thanks to logging of the diagnostic values
- Simulation function simplifies installation
For more information, please see 
Data Sheet
Technical details
Main features
- Material Stainless steel (1.4404 / 316L); PEI; FKM; PFA
- System Gold-plated contacts
- Output Signal Analog signal; IO-Link; calibration check status
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 1
- Process Connection Diameter Ø 6 mm
- Output Function Normally closed; (diagnostic signal)
- Electrical Design PNP/NPN
- Factory Setting -10 - 150 ° C / 14 - 302 ° F
- Installation Length EL (mm) 550
- Protection IP 68; IP 69K
- Connection Connector: 1 x M12; coding: A; Contacts: gold-plated
- Overload Protection Yes
- Short-circuit protection Yes
- Operating voltage [V] 18 - 32 DC; (cULus - Class 2 source required)
- Media Liquids and gases
- Reverse Polarity Protection Yes
- Current Consumption [mA] 10; (24 V)
- Analog Current Output [mA] 4 - 20
- Maximum Load [Ω ] (Ub - 15 V) x 50
- Ambient Temperature [° C] -25 - 70
- Storage Temperature [° C] -40 - 100
- MTTF [Years] 329
- Weight [g] 386.6
- Number of Inputs and Outputs Number of Digital Outputs: 1 Number of Analog Outputs: 1
- Total Number of Outputs 2
- Number of Analog Outputs 1
- Materials (Wetted Parts) Stainless steel (1.4404 / 316L); PEEK
- Maximum Voltage Drop Switching Output DC [V] 2
- Dimensions [mm] Ø 50 / L = 593.5
- Power-on Delay Time [s] 6
- Pressure Rating [bar] 160
- Permanent Current Rating of Switching Output DC [mA] 100
- Dynamic Response T05 / T09 [s] 1,5 / 4
- Parameter Setting Display Unit; scaling of the analog output; calibration check limit; switching logic diagnostic output; simulation mode
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9 CDV
- Profiles Digital Measuring Sensor, Common Profile, Blob Transfer
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 1
- Process Data Binary 1
- Minimum Process Cycle Time [ms] 4.4
- Type of Short-Circuit Protection Yes (non-latching)
- Measuring Element 1 x Pt 1000
- Integrated Watchdog Yes
- Installation length EL [mm] 550
- Surface characteristics Ra/Rz of the wetted parts Ra: <0.8
- Resolution of Analog Output [K] 0.05
- Precision analog output [K] ± 0,2
- IO-Link Resolution Temperature [K] 0.01
- Probe Diameter [mm] 6
- Reference element 1 x NTC
- Diagnostic output Calibration check status and error diagnostics
- Note on measuring range Factory Setting
- Calibration check limit [K] 0.5 - 3
- In steps of [K] 0.05
- Precision IO-Link [K] ± 0,2
- Temperature coefficient analog output [% of the span / 10 K] < ± 0,02; (In case of deviation from the reference condition 25 ± 5 ° C)
- Temperature coefficient IO-Link [% of the span / 10 K] < ± 0,01; (In case of deviation from the reference condition 25 ± 5 ° C)
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.