Prime Buy
1-855-969-9322
1-908-282-3332 (Intl.)

IFM SUH401 PNP/NPN .5 - 1000 l/min Ultrasonic Flow Meter

  • Brand IFM
  • Part # SUH401
  • Model # SUC50IJBFRKG/US
  • Condition
    Brand New
Buy in Bulk 4 Applicable Promotion(s)
Show All

  • Buy 200 pcs, get 7% off

    Save 7% each on IFM SUH401 PNP/NPN .5 - 1000 l/min Ultrasonic Flow Meter when you purchase 200 or more

  • Buy 100 pcs, get 5% off

    Save 5% each on IFM SUH401 PNP/NPN .5 - 1000 l/min Ultrasonic Flow Meter when you purchase 100 or more

  • Buy 50 pcs, get 3% off

    Save 3% each on IFM SUH401 PNP/NPN .5 - 1000 l/min Ultrasonic Flow Meter when you purchase 50 or more

  • Buy 25 pcs, get 1% off

    Save 1% each on IFM SUH401 PNP/NPN .5 - 1000 l/min Ultrasonic Flow Meter when you purchase 25 or more

Availability
Typically In Stock
Check Availability
Quantity
Share:

Features:

  • Accurate flow measurement of ultrapure water and water
  • A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance
  • The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials
  • Operating status LED signals the sensor status and allows conclusions about process quality

Principle of Operation

Ultrasonic flow meters consist of transducers that transmit and receive sound pulses. Medium on the opposite pipe wall diverts the direction of the transmitted pulse from one transducer to the other. A pulse is sent through the medium and the sensor measures the time of flight from one transducer to the other. Then a pulse is sent in the opposite direction. The meter measures the difference in time and calculates the flow rate.

The internal pipe of the meter is constructed of only 316 stainless steel with no obstructions in the flow. There is a small reduction in sensing area through the sensor which leads to a minimal pressure drop

Signal Quality of Application

Monitoring the conditions of the ultrasonic sensors' signal strength indicates what is going on inside your pipe system. As a result, possible maintenance measures can be taken at an early stage and machine downtimes can be minimized.

The unit detects the signal quality in three levels:

  • Normal: The unit works without restrictions.
  • Low: The signal quality is disturbed but the unit is still in specification. Check for air bubbles, particles, or build-up.
  • No signal: No medium is present or no signal is possible due to extreme conditions.
    • Extreme conditions = excessive particles or bubbles, such as foam; and adhesions/ build-up on the internal pipe that strongly disrupt the signal.

Diagnostic LED color definitions

For more information, please see pdf file Data Sheet

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Reseller
Manufacturer Warranty

Technical Details

Reviews
Product Characteristics
Process ConnectionClamp 2" DIN 32676 series C
SystemGold-plated contacts
MediaUltra-pure water; water; water-based media
Vacuum Resistance [mbar]-1000
Electrical Data
Operating Voltage [V]18 - 32 DC; (to SELV/PELV)
Current Consumption [mA]< 75
Protection ClassIII
Reverse Polarity ProtectionYes
Power-on Delay Time [s]5
Measuring PrincipleUltrasonic
Inputs / Outputs
Total Number of Inputs and Outputs2
Inputs
Outputs
Total Number of Outputs2
Electrical DesignPNP/NPN
Short-Circuit ProtectionYes
Type of Short-Circuit ProtectionYes (non-latching)
Overload ProtectionYes
Analog
Number of Analog Outputs1
Analog Current Output [mA]4 - 20
Maximum Load [Ω ]500
Digital
Number of Digital Outputs2
Output FunctionNormally open / closed; (configurable)
Maximum Voltage Drop Switching Output DC [V]2
Permanent Current Rating of Switching Output DC [mA]100
Switching Frequency DC [Hz]0 - 10000
Measuring/Setting Range
Frequency at the end point FRP [Hz]1 - 10000
Volumetric flow quantity monitoring
Pulse length [s]0.002 - 2
Pulse value0.01 - 99990000 l; 0.026 - 26414563.515 gal
Temperature Monitoring
Frequency at the end point FRP [Hz]1 - 10000
Accuracy / deviations Flow monitoring
Accuracy (in the Measuring Range)± (1,0 % MW + 0,5 % MEW)
Repeatability± 0,2 % MEW
Temperature Monitoring
Accuracy [K]± 2,5 (Q>5 % MEW)
Temperature coefficient [% of the span / 10 K]0,2
Reaction Times Flow monitoring
Response Time [s]< 0.25; (dAP = 0, T09)
Damping Process Value dAP [s]0 - 5
Temperature Monitoring
Dynamic Response T05 / T09 [s]5,7 / 86
Software / Programming
Diagnostic functionsDirection of flow detection; signal quality
Interfaces
Communication InterfaceIO-Link
Transmission TypeCOM2 (38,4 kBaud)
IO-Link Revision1.1.3
SDCI StandardIEC 61131-9: 2013-07
Required Master Port ClassA
Process Data Analog3
Process Data Binary2
Minimum Process Cycle Time [ms]9.6
Operating Conditions
Ambient Temperature [° C]-20 - 60
Storage Temperature [° C]-25 - 80
ProtectionIP 69K
MTTF [Years]160
Pressure Equipment DirectiveCan be used for group 2 fluids; group 1 fluids on request
Mechanical Data
Weight [g]936.1
Inlet pipe length5 x DN
Outlet pipe length1 x DN
MaterialHousing: stainless steel (1.4404 / 316L); Display: PFA; sealing Display: FKM; connector: POKAN
Materials (Wetted Parts)Pipe section: stainless steel (1.4404 / 316L)
Nominal diameterDN50
Process ConnectionClamp 2" DIN 32676 series C
Process Connection suitable for pipe standard2" / Ø 50,8 mm x 1,65 mm (DIN 11866 series C; ASME BPE)
Surface characteristics Ra/Rz of the wetted parts≤ 0.8 μ m / 32 μ in
Electrical Connection
ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated
Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details
Product Characteristics
Process ConnectionClamp 2" DIN 32676 series C
SystemGold-plated contacts
MediaUltra-pure water; water; water-based media
Vacuum Resistance [mbar]-1000
Electrical Data
Operating Voltage [V]18 - 32 DC; (to SELV/PELV)
Current Consumption [mA]< 75
Protection ClassIII
Reverse Polarity ProtectionYes
Power-on Delay Time [s]5
Measuring PrincipleUltrasonic
Inputs / Outputs
Total Number of Inputs and Outputs2
Inputs
Outputs
Total Number of Outputs2
Electrical DesignPNP/NPN
Short-Circuit ProtectionYes
Type of Short-Circuit ProtectionYes (non-latching)
Overload ProtectionYes
Analog
Number of Analog Outputs1
Analog Current Output [mA]4 - 20
Maximum Load [Ω ]500
Digital
Number of Digital Outputs2
Output FunctionNormally open / closed; (configurable)
Maximum Voltage Drop Switching Output DC [V]2
Permanent Current Rating of Switching Output DC [mA]100
Switching Frequency DC [Hz]0 - 10000
Measuring/Setting Range
Frequency at the end point FRP [Hz]1 - 10000
Volumetric flow quantity monitoring
Pulse length [s]0.002 - 2
Pulse value0.01 - 99990000 l; 0.026 - 26414563.515 gal
Temperature Monitoring
Frequency at the end point FRP [Hz]1 - 10000
Accuracy / deviations Flow monitoring
Accuracy (in the Measuring Range)± (1,0 % MW + 0,5 % MEW)
Repeatability± 0,2 % MEW
Temperature Monitoring
Accuracy [K]± 2,5 (Q>5 % MEW)
Temperature coefficient [% of the span / 10 K]0,2
Reaction Times Flow monitoring
Response Time [s]< 0.25; (dAP = 0, T09)
Damping Process Value dAP [s]0 - 5
Temperature Monitoring
Dynamic Response T05 / T09 [s]5,7 / 86
Software / Programming
Diagnostic functionsDirection of flow detection; signal quality
Interfaces
Communication InterfaceIO-Link
Transmission TypeCOM2 (38,4 kBaud)
IO-Link Revision1.1.3
SDCI StandardIEC 61131-9: 2013-07
Required Master Port ClassA
Process Data Analog3
Process Data Binary2
Minimum Process Cycle Time [ms]9.6
Operating Conditions
Ambient Temperature [° C]-20 - 60
Storage Temperature [° C]-25 - 80
ProtectionIP 69K
MTTF [Years]160
Pressure Equipment DirectiveCan be used for group 2 fluids; group 1 fluids on request
Mechanical Data
Weight [g]936.1
Inlet pipe length5 x DN
Outlet pipe length1 x DN
MaterialHousing: stainless steel (1.4404 / 316L); Display: PFA; sealing Display: FKM; connector: POKAN
Materials (Wetted Parts)Pipe section: stainless steel (1.4404 / 316L)
Nominal diameterDN50
Process ConnectionClamp 2" DIN 32676 series C
Process Connection suitable for pipe standard2" / Ø 50,8 mm x 1,65 mm (DIN 11866 series C; ASME BPE)
Surface characteristics Ra/Rz of the wetted parts≤ 0.8 μ m / 32 μ in
Electrical Connection
ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Prime Buy
1-855-969-9322
1-908-282-3332 (Intl.)