Buy IFM SU8200, PNP/NPN 0 - 100 l/min Ultrasonic Flow Meter

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

List Price
$1,087.00
- Sale Price
  $977.00 Each

Buy in Bulk 4 Applicable Promotion(s)

Show All

Buy 200 pcs, get 7% off
Save 7% each on IFM SU8200 PNP/NPN 0 - 100 l/min Ultrasonic Flow Meter when you purchase 200 or more
Buy 100 pcs, get 5% off
Save 5% each on IFM SU8200 PNP/NPN 0 - 100 l/min Ultrasonic Flow Meter when you purchase 100 or more
Buy 50 pcs, get 3% off
Save 3% each on IFM SU8200 PNP/NPN 0 - 100 l/min Ultrasonic Flow Meter when you purchase 50 or more
Buy 25 pcs, get 1% off
Save 1% each on IFM SU8200 PNP/NPN 0 - 100 l/min Ultrasonic Flow Meter when you purchase 25 or more

Availability: Typically In Stock

Check Availability

Quantity

Options and Related Products

Measuring Range (l/min):: Measuring Range (l/min): 0 - 100

Features:

Reliable detection of flow and medium temperature
Suitable for water, oils and glycol solutions
For installation in pipes
With two programmable switching outputs
Clearly visible numerical display

Applications

For industrial applications

Principle of Operation

Ultrasonic flow meters consist of transducers that transmit and receive sound pulses. Medium on the opposite pipe wall diverts the direction of the transmitted pulse from one transducer to the other. A pulse is sent through the medium and the sensor measures the time of flight from one transducer to the other. Then a pulse is sent in the opposite direction. The meter measures the difference in time and calculates the flow rate.

The internal pipe of the meter is constructed of only 316 stainless steel with no obstructions in the flow. There is a small reduction in sensing area through the sensor which leads to a minimal pressure drop

Signal Quality of Application

Monitoring the conditions of the ultrasonic sensors' signal strength indicates what is going on inside your pipe system. As a result, possible maintenance measures can be taken at an early stage and machine downtimes can be minimized.

The unit detects the signal quality in three levels:

Normal: The unit works without restrictions.
Low: The signal quality is disturbed but the unit is still in specification. Check for air bubbles, particles, or build-up.
No signal: No medium is present or no signal is possible due to extreme conditions.
- Extreme conditions = excessive particles or bubbles, such as foam; and adhesions/ build-up on the internal pipe that strongly disrupt the signal.

Diagnostic LED color definitions

For more information, please see pdf file Data Sheet

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Product Characteristics
Number of Inputs and Outputs	Number of Digital Outputs: 2
Process Connection	Threaded connection G 1 flat seal
System	Gold-plated contacts
Installation	Connection to pipe by means of an adapter
Media	Water; glycol solutions; Coolants; oils
Medium Temperature [° C]	-10 - 80
Electrical Data
Operating Voltage [V]	19 - 30 DC; (to SELV/PELV)
Current Consumption [mA]	100
Minimum Insulation Resistance [MΩ ]	100; (500 V DC)
Protection Class	III
Reverse Polarity Protection	Yes
Power-on Delay Time [s]	10
Inputs / Outputs
Number of Inputs and Outputs	Number of Digital Outputs: 2
Outputs
Total Number of Outputs	2
Output Signal	Switching signal
Electrical Design	PNP
Number of Digital Outputs	2
Output Function	Normally open / closed; (configurable)
Maximum Voltage Drop Switching Output DC [V]	2
Permanent Current Rating of Switching Output DC [mA]	250; (per output)
Short-Circuit Protection	Yes
Type of Short-Circuit Protection	Yes (non-latching)
Overload Protection	Yes
Measuring/Setting Range
Maximum flow rate [l/min]	110
Temperature Monitoring
Measuring Range [° C]	-10 - 80
Resolution [° C]	0.2
Set point SP [° C]	-9.8 - 80
Reset point rP [° C]	-10 - 79.8
In Steps of [° C]	0.2
Accuracy / deviations Flow monitoring
Accuracy (in the Measuring Range)	Water: <± (3 % MW + 0,2 % MEW); glycol (35 %), oil (viscosity 68 mm² /s at 40 ° C): <± (5 % MW + 0,5 % MEW)
Repeatability	0,2 l/min (0,05 gpm)
Temperature Monitoring
Accuracy [K]	0,2
Reaction Times Flow monitoring
Response Time [s]	0.25; (dAP = 0)
Delay Time Programmable dS, dr [s]	0 - 50
Damping Process Value dAP [s]	0 - 1
Temperature Monitoring
Dynamic Response T05 / T09 [s]	T09 = 70 (Q>5 l/min); (water)
Software / Programming
Parameter Setting	Flow monitoring; Temperature Monitoring
Operating Conditions
Ambient Temperature [° C]	-10 - 60
Storage Temperature [° C]	-25 - 80
Protection	IP 67
MTTF [Years]	246
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical Data
Weight [g]	1694
Material	Housing: AlMgSi0.5 anodized; sealing: FKM; PA 6.6; cover film: PA
Materials (Wetted Parts)	Stainless steel (1.4404 / 316L); FKM; PES; Centellen 200
Process Connection	Threaded connection G 1 flat seal
Display Unit	L/min; m³/h; gpm; gph; ° C; ° F

Product Details

Product Characteristics
Number of Inputs and Outputs	Number of Digital Outputs: 2
Process Connection	Threaded connection G 1 flat seal
System	Gold-plated contacts
Installation	Connection to pipe by means of an adapter
Media	Water; glycol solutions; Coolants; oils
Medium Temperature [° C]	-10 - 80
Electrical Data
Operating Voltage [V]	19 - 30 DC; (to SELV/PELV)
Current Consumption [mA]	100
Minimum Insulation Resistance [MΩ ]	100; (500 V DC)
Protection Class	III
Reverse Polarity Protection	Yes
Power-on Delay Time [s]	10
Inputs / Outputs
Number of Inputs and Outputs	Number of Digital Outputs: 2
Outputs
Total Number of Outputs	2
Output Signal	Switching signal
Electrical Design	PNP
Number of Digital Outputs	2
Output Function	Normally open / closed; (configurable)
Maximum Voltage Drop Switching Output DC [V]	2
Permanent Current Rating of Switching Output DC [mA]	250; (per output)
Short-Circuit Protection	Yes
Type of Short-Circuit Protection	Yes (non-latching)
Overload Protection	Yes
Measuring/Setting Range
Maximum flow rate [l/min]	110
Temperature Monitoring
Measuring Range [° C]	-10 - 80
Resolution [° C]	0.2
Set point SP [° C]	-9.8 - 80
Reset point rP [° C]	-10 - 79.8
In Steps of [° C]	0.2
Accuracy / deviations Flow monitoring
Accuracy (in the Measuring Range)	Water: <± (3 % MW + 0,2 % MEW); glycol (35 %), oil (viscosity 68 mm² /s at 40 ° C): <± (5 % MW + 0,5 % MEW)
Repeatability	0,2 l/min (0,05 gpm)
Temperature Monitoring
Accuracy [K]	0,2
Reaction Times Flow monitoring
Response Time [s]	0.25; (dAP = 0)
Delay Time Programmable dS, dr [s]	0 - 50
Damping Process Value dAP [s]	0 - 1
Temperature Monitoring
Dynamic Response T05 / T09 [s]	T09 = 70 (Q>5 l/min); (water)
Software / Programming
Parameter Setting	Flow monitoring; Temperature Monitoring
Operating Conditions
Ambient Temperature [° C]	-10 - 60
Storage Temperature [° C]	-25 - 80
Protection	IP 67
MTTF [Years]	246
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical Data
Weight [g]	1694
Material	Housing: AlMgSi0.5 anodized; sealing: FKM; PA 6.6; cover film: PA
Materials (Wetted Parts)	Stainless steel (1.4404 / 316L); FKM; PES; Centellen 200
Process Connection	Threaded connection G 1 flat seal
Display Unit	L/min; m³/h; gpm; gph; ° C; ° F

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

IFM SU8200 PNP/NPN 0 - 100 l/min Ultrasonic Flow Meter

Identifiers

Technical Details

Reviews