IFM SD5100 Flow Rate Meter for Argon, Carbon Dioxide, Nitrogen

Brand: IFM

Part #:

SD5100

Model #:

SDR14DGXFPKG/US-100

Condition:

Brand New

Check availability

Manufacturer warranty

Description

Features:

Precise measurement of flow, consumption and medium temperature
High accuracy, repeatability and measurement dynamics
For detecting compressed air in industrial use
With switching output, analog output and pulse output
Clearly visible numerical display

Applications

For industrial applications

For more information, please see pdf file Data Sheet

Check availability

Technical details

Main features

Material PBT-GF20; PC; PC; stainless steel (1.4301 / 304); FKM
Output Signal Switching signal; analog signal; pulse signal; IO-Link; (configurable)
Communication Interface IO-Link
Protection Class III
Number of Digital Outputs 2
Process Connection Threaded connection G 1/4 DN8
Output Function Normally open / closed; (configurable)
Electrical Design PNP
Protection IP 65
Connection Connector: 1 x M12; coding: A
Overload Protection Yes
Short-circuit protection Yes
Pulse Output Consumed quantity meter
Operating voltage [V] 18 - 30 DC; (to SELV/PELV)
Media Argon (Ar); carbon dioxide (CO2); nitrogen (N2)
Reverse Polarity Protection Yes
Current Consumption [mA] < 100
Analog Current Output [mA] 4 - 20; (scalable)
Maximum Load [Ω ] 500
Ambient Temperature [° C] 0 - 60
Storage Temperature [° C] -20 - 85
Maximum Relative Air Humidity [%] 90
MTTF [Years] 227
Weight [g] 981
Medium Temperature [° C] 0 - 60
Total Number of Outputs 2
Number of Analog Outputs 1
Pressure Equipment Directive Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Materials (Wetted Parts) Stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polYester; FKM; aluminum anodized
Maximum Voltage Drop Switching Output DC [V] 2
Power-on Delay Time [s] 1
Response Time [s] 0.1; (dAP = 0)
Pressure Rating [bar] 16
Pressure Rating [MPa] 1.6
Permanent Current Rating of Switching Output DC [mA] 250; (per output)
Measuring dynamics 1: 300
Measuring Range [° C] 0 - 60
Display range [° C] -12 - 72
Resolution [° C] 0.2
Set point SP [° C] 0.4 - 60
Reset point rP [° C] 0 - 59.8
In Steps of [° C] 0.2
Accuracy (in the Measuring Range) ± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533)
Accuracy [K] ± 2; (medium flow in the limit area of the flow measurement range)
Parameter Setting Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / closed; current/pulse output; display can be rotated and switched off; Display Unit; medium selection
Transmission Type COM2 (38,4 kBaud)
IO-Link Revision 1.1
SDCI Standard IEC 61131-9
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO Mode Yes
Required Master Port Class A
Process Data Analog 3
Process Data Binary 2
Minimum Process Cycle Time [ms] 4.1
Type of Short-Circuit Protection Yes (non-latching)
Pulse value 0.001 - 1 000 000 m³
In steps of 0.001 - 1000 m³
Pulse length [s] 0,062 - 2
Repeatability [% of the measured value] ± 1,5
Damping Process Xalue dAP in Steps [s] 0 - 0,2 - 0,4 - 0,6 - 0,8 - 1
Analog Start Point [° C] 0 - 48
Analog End Point [° C] 12 - 60
Display Unit Nl/min; Nm³/h; Nm³; ° C
Measuring range [m³/h] 0.08 - 24.04, 0.04 - 14.36, 0.04 - 15
Display range [m³/h] 0 - 28.84, 0 - 17.24, 0 - 18
Low flow cut-off LFC [m³/h] < 0.26
Resolution [m³/h] 0.02
Set point SP [m³/h] 0.22 - 24.04, 0.14 - 14.36, 0.14 - 15
Reset point rP [m³/h] 0.12 - 23.94, 0.08 - 14.3, 0.08 - 14.94
Analog start point ASP [m³/h] 0 - 12, 0 - 19.24, 0 - 11.48
Analog end point AEP [m³/h] 4.8 - 24.04, 2.88 - 14.36, 3 - 15
In steps of [m³/h] 0.02