IFM SD2500 PNP/NPN 232PSI Compressed Air Meter
Condition: 
Brand New
Brand New $1,473.00 /Each
Manufacturer warranty Description
Features:
- Precise measurement of flow, consumption, pressure and medium temperature
- High accuracy, repeatability and measurement dynamics
- For detecting compressed air in industrial use
- Red/green display for clear identification of the acceptable range
- Display can be rotated for optimum alignment
Applications
- For industrial applications
For more information, please see 
Data Sheet
Technical details
Main features
- Inputs Counter reset
- Material PBT+PC-GF30; PPS GF40; stainless steel (1.4301 / 304); stainless steel (1.4305 / 303); steel (1.5523) galvanized; 2.0401 (brass / CW614N); FKM
- Output Signal Switching signal; analog signal; pulse signal; IO-Link; (configurable)
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 2
- Process Connection Threaded connection R 2 DN50
- Output Function Normally open / closed; (configurable)
- Electrical Design PNP/NPN
- Protection IP 65 IP 67
- Connection Connector: 1 x M12; coding: A
- Overload Protection Yes
- Repeatability ± (0,4 % MW + 0,1 % MEW)
- Short-circuit protection Yes
- Pulse Output Consumed quantity meter
- Operating voltage [V] 18 - 30 DC; (to SELV/PELV)
- Media Compressed air
- Reverse Polarity Protection Yes
- Current Consumption [mA] < 80
- Analog Current Output [mA] 4 - 20; (scalable)
- Maximum Load [Ω ] 500
- Ambient Temperature [° C] 0 - 60
- Storage Temperature [° C] -20 - 85
- Maximum Relative Air Humidity [%] 90
- MTTF [Years] 183
- Weight [g] 2650.5
- Medium Temperature [° C] -10 - 60
- Number of Analog Outputs 1
- Pressure Equipment Directive Sound engineering practice; can be used for stable gases fluid group 2
- Materials (Wetted Parts) Stainless steel (1.4301 / 304); stainless steel (1.4305 / 303); FKM; ceramics glass passivated; PPS GF40; Al2O3 (ceramics); acrylate
- Maximum Voltage Drop Switching Output DC [V] 2.5
- Power-on Delay Time [s] 1
- Response Time [s] 0.05, 0.1; (dAP = 0)
- Pressure Rating [bar] 16
- Pressure Rating [MPa] 1.6
- Repeatability [% of the final value] ± 0,2
- Permanent Current Rating of Switching Output DC [mA] 150; (per output)
- Min. bursting pressure [bar] 64
- MAWP (for Applications According to CRN) [bar] 9.5
- Accuracy (in the Measuring Range) Class 141: ± (2 % MW + 0,5 % MEW); class 344: ± (6 % MW + 0,6 % MEW) ; air quality to ISO 8573-1: 2010; at medium temperature 23 ° C
- Accuracy [K] ± 0,5; (medium flow in the limit area of the flow measurement range)
- Damping Process Value dAP [s] 0 - 5
- Dynamic Response T05 / T09 [s] T09 = 0,5
- Parameter Setting Hysteresis / window; normally open / closed; current/pulse output; display can be rotated and switched off; Display Unit; totalizer
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9 CDV
- Profiles Digital Measuring Sensor (0x800A), Identification and Diagnosis (0x4000)
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 8
- Process Data Binary 2
- Minimum Process Cycle Time [ms] 7.2
- Type of Short-Circuit Protection Yes (non-latching)
- Pulse length [s] 0.002 - 2
- Min. bursting pressure [MPa] 6.4
- Measuring range [bar] -1 - 16
- Display range [bar] -1 - 20
- Resolution [bar] 0.05
- Set point SP [bar] -0.92 - 16
- Reset point rP [bar] -1 - 15.92
- Analog start point [bar] -1 - 12.8
- Analog end point [bar] 2.2 - 16
- In steps of [bar] 0.01
- Temperature Coefficient [1/K] ± 0,07 % MW
- Characteristics deviation [% of the final value] < ± 0,5; (BFSL = Best Fit Straight Line)
- Greatest TEMPCO of the span [% MEW / 10 K] ± 0,3
- Greatest TEMPCO of the zero point [% MEW / 10 K] ± 0,1
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.