IFM SBN233 7 - 360 gph Flow Meter with Fast Response and Display
Brand New
Manufacturer warranty Description
Features:
- Precise detection of flow in pipes
- Suitable for water, oils and glycol solutions
- Precise linearized analog output
- Robust housing with very high pressure resistance
- Lifespan of more than 10 million pressure cycles
Applications
- For industrial applications
The SB mechatronic flow meter works on the principle of a spring-supported piston. Flowing liquids lift the piston and the position of the piston is monitored by a magnetic sensor. The spring forces the piston to its original position with decreasing flow and the built-in check valve prevents backflow.
This design means the meter can be installed without regard to inlet/outlet piping requirements. Because a magnetic sensor is detecting the piston position, the response time is ≤ 10 msec. Since the flow is typically relatively stable, there is very little flexing of the spring. The meter has been successfully tested to 10 million cycles without any detectable wear.
For more information, please see 
Data Sheet
Technical details
- Material Stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated
- System Gold-plated contacts
- Output Signal Switching signal; analog signal; frequency signal; IO-Link; (configurable)
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 2
- Process Connection Threaded connection 3/4" NPT
- Output Function Normally open / closed; (configurable)
- Measuring Range (gph) 7 - 360
- Protection IP 65 IP 67
- Connection Connector: 1 x M12; coding: A; Contacts: gold-plated
- Overload Protection Yes
- Repeatability ± 1 % MEW
- Short-circuit protection Yes
- Operating voltage [V] 18 - 30 DC; (to SELV/PELV)
- Notes Please note the changed housing design!
- Media Liquids; water; glycol solutions; Coolants
- Temperature Drift 0,9802 ° F / K
- Reverse Polarity Protection Yes
- Current Consumption [mA] < 50
- Analog Current Output [mA] 4 - 20
- Maximum Load [Ω ] 500
- MTTF [Years] 145
- Weight [g] 691.5
- Total Number of Outputs 2
- Number of Analog Outputs 1
- Pressure Equipment Directive Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
- Materials (Wetted Parts) Stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
- Maximum Voltage Drop Switching Output DC [V] 2
- Power-on Delay Time [s] < 3
- Response Time [s] 0.01
- Medium temperature [° F] 14 - 212
- Pressure Rating [bar] 40
- Pressure Rating [MPa] 4
- Ambient Temperature [° F] 32 - 140
- Storage Temperature [° F] 5 - 176
- Permanent Current Rating of Switching Output DC [mA] 150; (per output 2 x 200 ( - 140 ° F); 2 x 250 ( - 104 ° F))
- MAWP (for Applications According to CRN) [bar] 40
- Switching cycles (mechanical) 10 million
- Frequency of the output [Hz] 0 - 10000
- Frequency at the end point FRP [Hz] 10 - 10000
- Measuring dynamics 1: 50
- Accuracy (in the Measuring Range) ± (4 % MW + 1 % MEW); (Q>0,5 l/min; medium and operating temperature: +71,6 ° F ± 4K)
- Accuracy [K] 3 K (77 ° F; Q>1 l/min)
- Damping Process Value dAP [s] 0 - 5
- Damping for the Analog Output dAA [s] 0 - 5
- Dynamic Response T05 / T09 [s] T09 = 120 (Q>1 l/min)
- Parameter Setting Hysteresis / window; normally open / closed; switching logic; current output; medium selection; damping for the switching output / analog output; display can be rotated and switched off; standard unit of measurement; process value color
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9 CDV
- Profiles Smart Sensor: Process Data Variable; Device Identification
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 2
- Process Data Binary 2
- Minimum Process Cycle Time [ms] 5
- Measuring range [° F] 14 - 212
- Display range [° F] -26 - 252
- Resolution [° F] 2
- Set point SP [° F] 16 - 212
- In steps of [° F] 2
- Frequency start point, FSP [° F] 14 - 172
- Frequency end point, FEP [° F] 54 - 212
- Reset point rP [° F] 14 - 210
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.