Product Characteristics |
Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
Process Connection | Clamp DN40 (1,5") DIN 32676 (ISO 2852) |
System | gold-plated contacts |
Media | viscous media and liquids with suspended particles; liquids and gases |
Medium Temperature [°C] | -20 - 200 |
Type of Pressure | Relative pressure |
Electrical Data |
Minimum Insulation Resistance [MΩ] | 100; (500 V DC) |
Protection Class | III |
Reverse Polarity Protection | Yes |
Integrated Watchdog | Yes |
3-Wire |
Operating Voltage [V] | 20 - 32 DC |
Current Consumption [mA] | 3.6 - 21 |
Power-on Delay Time [s] | 1 |
3-Wire |
Operating Voltage [V] | 18 - 32 DC |
Current Consumption [mA] | <45 |
Power-on Delay Time [s] | 0.5 |
Inputs / Outputs |
Number of Inputs and Outputs | Number of Digital Outputs: 2Number of Analog Outputs: 1 |
Outputs |
Total Number of Outputs | 2 |
Output Signal | Switching signal; analog signal; IO-Link; (configurable) |
Electrical Design | PNP/NPN |
Number of Digital Outputs | 2 |
Output Function | Normally open / closed; (configurable) |
Number of Analog Outputs | 1 |
Analog Current Output [mA] | 4 - 20, invertible; (scalable) |
Short-Circuit Protection | Yes |
Type of Short-Circuit Protection | Yes (non-latching) |
Overload Protection | Yes |
3-Wire |
Maximum Load [Ω] | 300 |
3-Wire |
Maximum Voltage Drop Switching Output DC [V] | 2 |
Permanent Current Rating of Switching Output DC [mA] | 250 |
Switching Frequency DC [Hz] | 125 |
Maximum Load [Ω] | (Ub - 10 V) / 20 mA |
Accuracy / Deviations |
Switch Point Accuracy [% of the Span] | ± 0,2; (Turn down 1: 1) |
Repeatability [% of the Span] | ± 0,1; (with temperature fluctuations<10 K; Turn down 1: 1) |
Characteristics Deviation [% of the Span] | ± 0,2; (Turn down 1: 1, linearity, incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
Linearity Deviation [% of the span] | ± 0,15; (Turn down 1: 1) |
Hysteresis Deviation [% of the Span] | ± 0,15; (Turn down 1: 1) |
Long-Term Stability [% of the Span] | ± 0,1; (Turn down 1: 1; per year) |
Temperature coefficient Zero Point [% of the Span / 10 K] | ± 0,3; (0 - 200 °C) |
Temperature Coefficient Span [% of the Span / 10 K] | ± 0,15; (0 - 200 °C) |
Reaction Times |
Damping Process Value dAP [s] | 0 - 30 |
Damping for the Analog Output dAA [s] | 0.01 - 99.99 |
3-Wire |
Step Response Time Analog Output [ms] | 45 |
3-Wire |
Minimum Response Time of Switching Output (dAP) [ms] | 3 |
Step Response Time Analog Output [ms] | 7 |
Interfaces |
Communication Interface | IO-Link |
Transmission Type | COM2 (38,4 kBaud) |
IO-Link Revision | 1.0 |
SDCI Standard | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 |
Profiles | No profile |
SIO Mode | Yes |
Required Master Port Class | A |
Process Data Analog | 1 |
Process Data Binary | 2 |
Minimum Process Cycle Time [ms] | 2.3 |
Operating Conditions |
Ambient Temperature [°C] | -25 - 80 |
Ambient Temperature [°C] | -25 - 65 |
Storage Temperature [°C] | -25 - 100 |
Protection | |
MTTF [Years] | 142 |
Mechanical Data |
Weight [g] | 1052.2 |
Material | Stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA |
Materials (Wetted Parts) | Stainless steel (1.4435 / 316L) |
Minimum Pressure Cycles | 10 million |
Process Connection | Clamp DN40 (1,5") DIN 32676 (ISO 2852) |
Surface characteristics Ra/Rz of the wetted parts | <0.38 / - |
Fill fluid for pressure transfer | NEOBEE (food grade, FDA compliant) |
Diaphragm diameter [mm] | 34 |
Display Unit | Mbar; kPa; psi; inH2O; mWS; % of the span |
Electrical Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |