IFM PE2596 PNP/NPN 290PSI Pressure Sensor with Display
Condition: 
Brand New
Brand New $621.00 /Each
Manufacturer warranty Description
Features:
- Two switching outputs, one of them programmable as IO-Link and one as analog output
- Red/green display for clear identification of the acceptable range
- The process connection can be rotated for optimum alignment
- With long-term stability thanks to high overload protection
- Robust design for use in harsh industrial environments
Applications:
- For industrial applications
For more information, please see 
Data Sheet
Technical details
Main features
- Material Stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; EPDM
- System Gold-plated contacts
- Output Signal Switching signal; analog signal; IO-Link; (configurable)
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 2
- Process Connection Threaded connection G 1/4 external thread Internal thread: M5; DIN EN ISO 1179-2
- Output Function Normally open / closed; (configurable)
- Electrical Design PNP/NPN
- Protection IP 65 IP 67
- Connection Connector: 1 x M12; coding: A; Contacts: gold-plated
- Pressure Rating (PSI) 290
- Overload Protection Yes
- Short-circuit protection Yes
- Operating voltage [V] 18 - 30 DC; (to SELV/PELV)
- Media Liquids and gases
- Reverse Polarity Protection Yes
- Current Consumption [mA] <35
- Analog Current Output [mA] 4 - 20; (scalable 1: 5)
- MTTF [Years] 171
- Weight [g] 302
- Tightening Torque [Nm] 25 - 35; (recommended tightening torque; Depends on lubrication, seal and pressure rating)
- Type of Pressure Relative pressure
- Total Number of Outputs 2
- Number of Analog Outputs 1
- Analog Voltage Output [V] 0 - 10; (scalable 1: 5)
- Repeatability [% of the Span] ± 0,1; (with temperature fluctuations<10 K; Turn down 1: 1)
- Characteristics Deviation [% of the Span] ± 0,25 (BFSL) /<± 0,5 (LS); (Turn down 1: 1; BFSL = Best Fit Straight Line; LS = limit value setting)
- Long-Term Stability [% of the Span] ± 0,05; (Turn down 1: 1; per 6 months)
- Temperature coefficient Zero Point [% of the Span / 10 K] 0,2; (-25 - 80 °C)
- Temperature Coefficient Span [% of the Span / 10 K] 0,2; (-25 - 80 °C)
- Pressure Equipment Directive Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
- Materials (Wetted Parts) Stainless steel (1.4404 / 316L); Al2O3 (99.9 %; ceramics); EPDM
- Minimum Pressure Cycles 100 million
- Restrictor Element Integrated No (can be retrofitted)
- Maximum Voltage Drop Switching Output DC [V] 2
- Power-on Delay Time [s] 0.3
- Permanent Current Rating of Switching Output DC [mA] 250
- Damping Process Value dAP [s] 0 - 4
- Damping for the Analog Output dAA [s] 0 - 4
- Parameter Setting Hysteresis / window; normally open / closed; switch-on/switch-off delay; Damping; Display Unit; current/voltage output
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9
- Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 1
- Process Data Binary 2
- Minimum Process Cycle Time [ms] 2.3
- Type of Short-Circuit Protection Yes (non-latching)
- Ambient Temperature [°C] -25 - 80
- Storage Temperature [°C] -40 - 100
- Measuring Element Ceramic-capacitive pressure measuring cell
- Medium Temperature [°C] -25 - 80
- Minimum Insulation Resistance [MΩ] 100; (500 V DC)
- Minimum Load Resistance [Ω] 2000
- Maximum Load [Ω] 500
- Vacuum Resistance [mbar] -1000
- Hysteresis Deviation [% of the Span] ± 0,1; (Turn down 1: 1)
- Process Connection sealing EPDM
- Integrated Watchdog Yes
- Switching Frequency DC [Hz] <500
- Switch Point Accuracy [% of the Span] ± 0,4; (Turn down 1: 1)
- Response Time [ms] <1.5
- Delay Time Programmable dS, dr [s] 0 - 50
- Maximum Response Time Analog Output [ms] 3
- Notes on the Accuracy / Deviation Switch point accuracy, linearity error under DNV GL: <± 1%: <± 1%
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.