| Product Characteristics |
| Number of Inputs and Outputs | Number of Digital Outputs: 4 |
| Factory Setting | 2 switching outputs level (OUT1, OUT2); 2 switching outputs temperature (OUT3, OUT4); mineral oils |
| Probe Length L [mm] | 264 |
| Media | Hydrous coolants; oils; oil-based media; water; media similar to water |
| Dielectric Constant of the Medium | >2 |
| Cannot be Used for | Extremely conductive media; adhering media; granulates; bulk material; acids; alkali |
| Tank Pressure [bar] | 0.5; (when mounting with mounting accessories: E43001 - E43007, E43019) |
| Coolants |
| Medium Temperature [°C] | 0 - 35; (with climate tube E43100 35 - 65 °C) |
| Oil |
| Medium Temperature [°C] | 0 - 70 |
| Medium Temperature Short Time [°C] | 0 - 90; (<1 h) |
| Water |
| Medium Temperature [°C] | 0 - 35; (with climate tube E43100 35 - 65 °C) |
| Electrical Data |
| Operating Voltage [V] | 18 - 30 DC |
| Current Consumption [mA] | <50 |
| Protection Class | III |
| Reverse Polarity Protection | Yes |
| Power-on Delay Time [s] | <3 |
| Measuring Principle | Capacitive |
| Inputs / Outputs |
| Number of Inputs and Outputs | Number of Digital Outputs: 4 |
| Outputs |
| Total Number of Outputs | 4 |
| Output Signal | Switching signal; IO-Link |
| Electrical Design | PNP/NPN |
| Number of Digital Outputs | 4 |
| Output Function | Normally open / closed; (configurable) |
| Maximum Voltage Drop Switching Output DC [V] | 2.5 |
| Permanent Current Rating of Switching Output DC [mA] | 200 |
| Short-Circuit Protection | Yes |
| Type of Short-Circuit Protection | Thermal, pulsed |
| Overload Protection | Yes |
| Measuring/Setting Range |
| Factory Setting | 2 switching outputs level (OUT1, OUT2); 2 switching outputs temperature (OUT3, OUT4); mineral oils |
| Probe Length L [mm] | 264 |
| Active Range A [mm] | 195 |
| Inactive Range I1 / I2 [mm] | 53 / 16 |
| Setting Range |
| Set Point SP [mm] | 25 - 190 |
| Reset Point rP [mm] | 20 - 195 |
| In Steps of [mm] | 5 |
| Reference Point OP [mm] | 69 - 82 - 94 - 106 - 118 - 130 - 143 - 155 - 167 - 179 - 191 - 204 - OFF |
| Hysteresis, OP [mm] | 2 |
| Temperature Monitoring |
| Measuring Range [°C] | -20 - 90 |
| Set point SP [°C] | -19.5 - 90 |
| Reset point rP [°C] | -20 - 89.5 |
| In steps of [°C] | 0.5 |
| Resolution of switching output [K] | 0.5 |
| Accuracy / Deviations |
| Measuring Error [% of the Final Value] | ± 5 |
| Repeatability | ± 2 |
| Resolution [mm] | 5 |
| Temperature Monitoring |
| Switch point accuracy [K] | ± 1,5 |
| Resolution [K] | 0.5 |
| Dynamic response T09 [s] | 90 |
| Software / Programming |
| Parameter Setting | Hysteresis / window; normally open / closed; SP/rP position; OP position; adjustment OP; medium selection; offset setting; Display Unit; process value assignment |
| Interfaces |
| Communication Interface | IO-Link |
| Transmission Type | COM2 (38,4 kBaud) |
| IO-Link Revision | 1.1 |
| SDCI Standard | IEC 61131-9 |
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO Mode | Yes |
| Required Master Port Class | A |
| Process Data Analog | 4 |
| Process Data Binary | 4 |
| Minimum Process Cycle Time [ms] | 4.5 |
| Operating Conditions |
| Ambient Temperature [°C] | 0 - 60 |
| Storage Temperature [°C] | -25 - 80 |
| Protection | IP 67 |
| MTTF [Years] | 224 |
| Mechanical Data |
| Weight [g] | 290.35 |
| Dimensions [mm] | Dia. 16 |
| Material | Stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PP; PA; TPV |
| Materials (Wetted Parts) | PP |
| Electrical Connection |
| Connection | Connector: 1 x M12; coding: A |
