IFM LT3022 Electronic Level and Temperature Sensor with 264mm Probe
Condition: 
Brand New
Brand New $789.00 /Each
Manufacturer warranty Description
Features:
- Reliable level detection in containers and tanks
- For use in water, oils and coolants
- User-friendly setting of switching function and switch points
- Level and temperature monitoring with just one unit
- Clearly visible numerical display
For more information, please see 
Data Sheet
Technical details
Main features
- Material Stainless steel (1.4301 / 304) Stainless steel (1.4404 / 316L) FKM NBR PBT PC PA PP TPV
- Output Signal Switching signal; analog signal; IO-Link
- Communication Interface IO-Link
- Protection Class III
- Number of Digital Outputs 1
- Output Function Normally open / closed; (configurable)
- Probe Length (mm) 264
- Electrical Design PNP/NPN
- Factory Setting Mineral oils
- Protection IP 67
- Connection Connector: 1 x M12; coding: A
- Overload Protection Yes
- Repeatability ± 2
- Short-circuit protection Yes
- Operating voltage [V] 18 - 30 DC
- Media Hydrous coolants; oils; oil-based media; water; media similar to water
- Reverse Polarity Protection Yes
- Current Consumption [mA] <50
- Analog Current Output [mA] 4 - 20, invertible
- MTTF [Years] 222
- Weight [g] 290
- Number of Inputs and Outputs Number of Digital Outputs: 1 Number of Analog Outputs: 1
- Total Number of Outputs 2
- Number of Analog Outputs 1
- Analog Voltage Output [V] 0 - 10, invertible
- Materials (Wetted Parts) PP
- Measuring error [% of the final value] ± 5
- Maximum Voltage Drop Switching Output DC [V] 2.5
- Dimensions [mm] Dia. 16
- Power-on Delay Time [s] <3
- Permanent Current Rating of Switching Output DC [mA] 200
- Parameter Setting Hysteresis / window; normally open / closed; switching logic; current/voltage output; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9
- Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 4
- Process Data Binary 1
- Minimum Process Cycle Time [ms] 4.5
- Type of Short-Circuit Protection Thermal, pulsed
- Ambient Temperature [°C] 0 - 60
- Storage Temperature [°C] -25 - 80
- Probe Length L [mm] 264
- Medium Temperature [°C] 0 - 70, 0 - 35; (with climate tube E43100 35 - 65 °C)
- Minimum Load Resistance [Ω] 2000
- Maximum Load [Ω] 500
- Switch point accuracy [K] ± 1,5
- Resolution [K] 0.5
- Measuring Range [°C] -20 - 90
- Dielectric Constant of the Medium >2
- Active Range A [mm] 195
- Inactive Range I1 / I2 [mm] 53 / 16
- Set Point SP [mm] 25 - 200
- Reset Point rP [mm] 20 - 195
- In Steps of [mm] 5
- Resolution [mm] 5
- Zero Signal (Current) [mA] 4.0
- Full Signal (Current) [mA] 20
- Zero Signal (Voltage) [V] 0
- Full Signal (Voltage) [V] 10
- Cannot be Used for Extremely conductive media; adhering media; granulates; bulk material; acids; alkali
- Tank Pressure [bar] 0.5; (when mounting with mounting accessories: E43001 - E43007, E43019)
- Medium Temperature Short Time [°C] 0 - 90; (<1 h)
- Reference Point OP [mm] 69 - 82 - 94 - 106 - 118 - 130 - 143 - 155 - 167 - 179 - 191 - 204 - OFF
- Hysteresis, OP [mm] 2
- Set point SP [°C] -19.5 - 90
- Reset point rP [°C] -20 - 89.5
- In steps of [°C] 0.5
- Resolution of switching output [K] 0.5
- Dynamic response T09 [s] 90
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.