IFM KQ1000 PNP/NPN Continuous Level Sensor with 2m Cable
Condition: 
Brand New
Brand New $374.20 /Each
Manufacturer warranty Description
Features:
- Continuous level measurement behind non-metallic and non-conductive surfaces
- Non-contact detection so no influence caused by medium
- Three separate point level sensors in one unit
Applications:
- Continuous level measurement behind non-metallic and non-conductive surfaces
For more information, please see 
Data Sheet
Technical details
Main features
- Material PBT; PC;
- Application Continuous level measurement behind non-metallic and non-conductive surfaces
- Communication Interface IO-Link
- Protection Class III
- Applications DIN EN 60654-1 application class B2
- Number of Digital Outputs 3
- Cable Length (m) 2
- Electrical Design PNP/NPN; (configurable)
- Protection IP 65
- Overload Protection Yes
- Short-circuit protection Yes
- Operating voltage [V] 10 - 30 DC; (IO-Link: 18 - 30 DC)
- Media Dry bulk material; aqueous solutions; oils
- Reverse Polarity Protection Yes
- Measuring Principle Capacitive
- Current Consumption [mA] <50
- MTTF [Years] 290.43
- Weight [g] 432
- Number of Inputs and Outputs Number of Digital Outputs: 3
- Dimensions [mm] 250 x 28 x 16.7
- Repeatability [% of the final value] 2
- Permanent Current Rating of Switching Output DC [mA] 200
- Transmission Type COM2 (38,4 kBaud)
- IO-Link Revision 1.1
- SDCI Standard IEC 61131-9
- Profiles Digital Measuring Sensor Profile, Common Profile
- SIO Mode Yes
- Required Master Port Class A
- Process Data Analog 1
- Process Data Binary 3
- Minimum Process Cycle Time [ms] 9.6
- Type of Short-Circuit Protection Yes (non-latching)
- Maximum Power-on Delay Time [ms] 1300
- Ambient Temperature [°C] -20 - 80
- Storage Temperature [°C] -25 - 85
- Response Time [ms] 1300
- Cannot be Used for very adhesive media
- IO-Link Functions (Acyclical) Direction of installation; limitation of sensor elements; Sensitivity; minimum recognition threshold; Performance in case of a fault; error delay; Damping; LED mode; switch-on cycle counter; operating hours counter; switching cycles counter; min./Maximum process value; internal temperature; min./Maximum internal temperature; diagnostic data level
- Measuring Range [mm] <200
- Maximum resistance switching output [Ω] 8
- Detection range [mm] 228
- Set point SP [%] 5 - 95
- Reset point rP [%] 4 - 94
- In steps of [%] 1
- Offset deviation [% of the final value] 4
- Resolution [% of the final value] 1
- Linearity Deviation [% of the final value] 1
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.