Hall Research, EMX-DVI, Single and Dual Link DVI Extender with EDID Mgmt
The EMX-DVI automatically compensates for the signal degradation caused by long video cable runs of up to 50 ft (15 m) on its input and can drive long DVI Cables on its output to 40 ft (12 m) by boosting and echo-canceling the DVI video output. Its ability to equalize cable losses makes it ideal to be placed at the far (display) end of long DVI cables. By default, the unit is setup to buffer single link DVI (or HDMI) signals. Use the recessed LINK pushbutton to change the mode to support Dual link TMDS signals. There is an indicator on the top of the unit for the selected mode. In most instances, when configured for Single Link extension, the unit can operate from the power accessible through the DVI source signal and no external power supply connection is required. The unit ships with a universal power supply in case the power from the DVI input source is insufficient. The power supply is plugged in at the USB connector. When the USB port is connected to a PC (cable supplied), the unit is powered by the PC through the USB connection. The DDC channel (that handles EDID and HDCP data) can either be bypassed through the EMX-DVI (so the source communicates directly with the connected display), or it can be emulated whereby the EDID is supplied from internal memory. The product is shipped with a fixed internal EDID table for emulate mode, but this table can be Overwritten by either learning the EDID from a connected sink (display), or uploaded via the USB port using the free software from Hall Research. The user can revert to the original internal table if required, by performing factory reset using the software.
Features:
- Equalize and boost Single or Dual Link DVI video
- Manage EDID (pass-thru or emulate)
- Learn and Store EDID from any display
- USB port for managing EDID and configuration with free software
- Port-powered (from DVI sources that provide enough power)
- Includes Universal power adapter
- LED indicators for Mode display
- Analog VGA pass-through
- In Emulate mode allows PC to fully boot with video even if there is no physical display connected
- Supports Single and Dual-Link DVI, HDMI, CEC and 3D Video
- Use with or without display
- USB port for control and mgmt of EDID