Future Design Controls FDC-B41-5-1-0-0-0-0-0 Board Level Controller
Condition: 
Brand New
Brand NewChoose Output 1
Choose Power Input
$165.40 /Each
$191.00 You save $25.60 13%
Notification
Item is made to order and is not eligible for return or exchange unless defective. Please review our
Return Policy.
Manufacturer warranty Description
Future Design Controls, FDC-B41-5-1-0-0-0-0-0, Board Level PID Controller, 11-26VAC/VDC, Thermocouple, RTD
Features:
- High Performance PID control at Low Cost
- Fuzzy modified PID Heat and Cool control
- Fast Scan Rate: 5 scans/second
- Universal Input: Thermocouple and RTD
- High-accuracy 18 Bit A/D
- Up to two PID control outputs
- Alarm output
- Lockout protection
- SEL function allows custom user menu
- Bumpless Auto/Manual and failure mode
- Soft-start setpoint ramp function
- Dwell timer
- Configuration Port standard
The B41 Board Level Control is designed for OEM applications where panel and depth does not allow traditional DIN sized panel mount controls. The B41 is based upon FDC's 100 Series technology providing up to two PID outputs, alarm and communications capability. The B41 display board is the approximate size of a 1/4 DIN cutout providing the same display.
Technical details
Main features
- Output 1 None
- Power 11-26 VAC/VDC 12VA, 5W maximum
- Power Input 11-26VAC/VDC
- Accuracy Typically better than 0.25% of span
- Rate 0 to 360.0 seconds
- Operating Temperature -10°C to 50°C
- Storage Temperature -40°C to 60°C
- Vibration Resistance 10-55Hz, 10 m/s for 2 hours
- EMC ENC61326
- Humidity 0 to 90% (non-condensing)
- Sampling Rate 5 times per second
- Reset 0 to 3600 seconds
- Control Action Configurable Direct or Reverse
- Cycle Time 0.1 to 90 seconds
- Dielectric Strength 2000 VAC. 50/60Hz for 1 minute
- Signal Input Thermocouple J,K,T,E,B,R,S,N,L N/C
- Signal Input RTD PT100DIN and PT100 JIS
- Insulation Resistance 20 M ohms minimum 500VDC
- Cold Junction Compensation 0.1°C/°C ambient typical
- Sensor Break Protection mode configurable
- Common Mode Rejection Ratio 120dB
- LED Process Display 0.56"
- LED Setpoint Display 0.40"
- Status Indicator LED Out1, Out2, Alm, Man, AT, °C ,°F
- Proportional Band 0.1 to500°C (0.1-900°F)
- PID Fuzzy Auto Tune Cold or Warm Start
- Ramp Rate 0 to 500°C (900°F)/minute or hour
- Timer Dwell 0 to 4553.6 minutes
- Relay Hysteresis Configurable 0.1 to 90.0°F
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.