Enable-IT 828 Gigabit PoE Extender Unit

828 Includes Only:

• (1) EnableIT 828 Gigabit & PoE Ethernet Extender Unit
• (1) Enable-IT 828 Quickstart Guide
• (1) 10" Black Ethernet patch cords

Features:

• Extends standard Gigabit Ethernet Full Duplex 6 times beyond the IEEE barrier of 328ft (100m) with PoE 56V over CAT5e/6 or better wiring.
• Three LAN port design allows for deployment of (2) separate PoE IP Cameras or devices up to 1,200ft (360m).
• DIP switch selection enables you to turn on or off the PoE output for each port.
• Rapid LAN style installation RJ-45 LAN Interfaces no programming required.
• Cisco / Motorola reverse polarity PoE compatible.
• Daisy chain up to (3) 828's to 1,200ft (360m).
• Ideal for deploying High Definition IP Cameras requiring Gigabit throughput at distance.
• Supports VoIP (Voice over IP).
• LAN Device independence Transparent to 802.3 Protocols, Applications. and MAC / IP addresses.
• Sustained full-duplex service delivery end to end.
• You must supply the PoE to power the 828 standalone unit or you can order the 828P Gigabit PoE Extender.

The Enable-IT™ 828 Gigabit PoE Extender Unit is the world's 1st and only for 4 years running copper Gigabit PoE Extender Kit solution in the industry today. This 828 product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828 can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments – Nothing is more cost effective or simple to install. The three LAN port design allows for a laptop to be connected and quickly configure devices. The Enable-IT 828 can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE . This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today. The 828 Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location. This is ideal for installing high powered PoE cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure an IP camera.

For more information, please see Data Sheet