Eastwood 21128 Pneumatic Perfect Panel Prep Tool Butt Weld Helper
Brand NewNotification
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Manufacturer warranty Description
21128 Includes Only:
- (1) Eastwood Pneumatic Weld Prep/Punch Tool
- (1) Hex Key, 5mm
Features:
- Each strike forms a perfect 0.062" x 45° beveled flange
- Works great on 20 to 18 gauge
- Proper weld-prepped edges allow strong, flush, crack-free welds in sheet metal
- The convenient hole punch feature provides clean, burr-free 0.19" holes
Say goodbye to gaps, warpage and blow-through when welding along metal joints by getting them ready with the Eastwood Pneumatic Perfect Panel Prep Tool®. Eastwood patent-pending design creates the perfect welding edge - a 0.062-inch, 45-degree beveled flange. Go down both sides of the edge to properly form them so you can do a full penetration MIG or TIG spot weld. Speaking of which, this air tool also has a hole punch mechanism to create the burr-free holes needed for good butt welding. Less grinding and leveling will be needed post-weld, making the entire piece stronger.
A welding edge prep tool helps you get a flush fabrication on patch panels and fender replacement. It works best on the 18 or 20 gauge sheet metal commonly used for automotive panels. Professionals get just as much from this tool as beginners do because it simply works.
For more information, please see 
Data Sheet
Technical details
- Air Pressure Maximum 90 PSI
- Air Consumption Minimum, 4 CFM at 90 PSI.
- Weld Prep 22 to 18 Gauge Mild Steel
- Punch 16 Gauge Mild Steel
- Weld Prep Bend Angle 45°
- Weld Prep Bend Width 7/8"
- Punched Hole Diameter 3/16"
- Punch Hole Center Distance to Edge 0.28"
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.