Crestron, 6509972, SIW-100 Room Availability Status Indicator, Wall Mount
Features:
- Provides a highly-visible indication of room
- Reveals every free meeting room at a glance down the hallway
- Stylish wall mount design with clear acrylic lens
- Clearly visible at 50 feet or 15 meters
- Out-of-the-box functionality when used with a TSS-770, TSS-1070, TSW-770(-GV), or TSW-1070(-GV) series touch screen, the USB port, and cable are exclusively for connection to a Crestron TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen. The TSS-1070 and TSW-1070(-GV) must be powered using PoE+ (IEEE 802.3at Type 2 Class 4).
- Illuminates vivid green or red to indicate room free status
- Custom functionality is possible when connected to a Crestron® control system
- Supports RGB color mixing via custom control system programming
- Allows virtually any color illumination (except white)
- Energy-efficient at less than 2 Watts power consumption
- Single-wire USB or Cresnet® connectivity
- Mounts to a single-gang electrical box or plaster ring
- Projects 2 inches (52 mm) from the wall
- Control system integration can be accomplished through a USB connection to a TSW-770(-GV) or TSW-1070(-GV) series touch screen, or through a Cresnet connection to the control system. USB and Cresnet connectivity are mutually exclusive. When using USB, the touch screen must be addressable over Ethernet from the control system. There isn't control system integration when connected via USB to a TSS series touch screen.
With just a glance down the hallway, the SIW-100 status indicator provides a highly-visible indication of a room as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The clear acrylic lens glows bright green or red to indicate the room. The complete assembly mounts to the wall over a single-gang electrical box or plaster ring. For room scheduling applications, the SIW-100 simply connects via USB to a Crestron TSS-770, TSS-1070, TSW-770, TSW-770-GV, TSW-1070, or TSW-1070-GV series touch screen. No special programming or configuration is required. The indicator color is controlled by the room scheduling application, which runs on the touch screen and syncs with Crestron Fusion® or another room scheduling service. The indicator illuminates green when the room is free and red when the room is occupied.
For custom applications, the SIW-100 can be integrated with a Crestron control system and programmed to illuminate in a wide variety of colors. Its RGB LEDs can be controlled in 10% increments per color. When powered by USB, any single color LED can be used at full brightness, while if connected via Cresnet two-color LEDs can be used at full brightness simultaneously. Three-color mixing is possible when powered by Cresnet if each LED is limited to 70%. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired. Control system integration can be accomplished through a USB connection to a TSW-770(-GV) or TSW-1070(-GV) series touch screen, or through a Cresnet® connection to the control system.
Installing the SIW-100 is simple. It mounts to the wall over a standard 1-gang electrical box or plaster ring. Power and communications are supplied by a single USB or Cresnet wire. A six-foot (1.83 meters) USB cable is included, which connects to the touch screen mounted below. Alternately, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple status indicators using a single cable. When there isn't a suitable wall surface, the SIW-100 can be mounted to the mullion of an interior glass wall, window, or partition using the optional SSW-MUMK Mullion Mount Kit (sold separately). The same kit may also have adhered directly to the glass or any other smooth surface.
