Comnet NW2/M NetWave Hardened Ethernet Small Form ETSI Europe Only
Brand New
Manufacturer warranty Description
Comnet, NW2/M, NetWave Hardened Wireless Ethernet Small Form ETSI Europe Only
Features:
- Improved impact resistant polycarbonate enclosure
- 20, 40, and 80 MHz Channel Bandwidth Support
- Up to 500 Mbps Throughput (subject to environmental conditions)
- 802.11a/n/ac Compliant
- Distances up to 2 mi (FCC, IC) or 2 km (ETSI)
- IEEE802.3at PoE Compliant PD on port 1
- Environmentally Hardened −40° to +75°C
- Meets class IP67 dust and water immersion protection standards
- ETSI Standards (EU Region only):
- DFS Dynamic Frequency Selection
- TPC Transmit Power Control
- Secure transmission: WPA2 - AES or TKIP encryption
- ComNet Antenna alignment feature eases installation and setup
- Antenna Alignment Tools
- LED array displays unit operational status along with received signal strength
Applications:
- Simple to deploy and cost-effective alternative to physical connections to Ethernet edge equipment
- Integration of Ethernet where right-of-way issues mandate wireless communications
- ITS traffic signalization networks and Video Detection Systems (VDS)
- ITS roadside and city center CCTV surveillance, and surveillance of high-value or mission-critical assets
- Wireless communications in:
- Manufacturing
- Petrochemical refineries
- Wastewater treatment facilities
- Other industrial automation and control applications operating in harsh or out-of-plant environments
- Electrical substation video and perimeter surveillance
The NetWave industrially hardened wireless Ethernet transmission link can be configured through the embedded User Interface as a Client or as an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints to be connected to a central Access Point. Up to 15 endpoints can be linked to a central access point. The NW1/M and NW2/M support up to 95Mbps throughput using MIMO technology. The units can be powered by an IEEE 802.3af PoE compliant device or through the supplied power injection module. The NW1/M is FCC certified for use in North America and the NW2/M is ETSI, DFS and TPC certified for use in the European Union. These links are an ultra-small form factor addition to the ComNet NetWave product family.
Technical details
- Power Operating Power: 48 to 57 VDC @ 170 mA Power Consumption: 5 W Max PD Power: IEEE 802.3af PD compliant
- Connectors 10/100/1000 Ethernet RJ-45, Sealed Cable Gland
- Software Features Addressing: Static IP / DHCP Client / DHCP Server SNMP v3 Dynamic DNS 802.1q VLAN support Embedded Firewall QoS support Ability to Assign Static Routes Spanning Tree Protocol support 802.1x Port-Based Network Access Control User-Configurable Watchdog and Auto-Reboot Mechanism Multi-Level Configuration and Monitoring Login Accounts User Configurable Long Range Parameters
- LED Indicators Power On Ethernet Link Signal Strength
- Environmental MTBF: >100,000 hours Operating Temperature: -40° C to +75° C Storage Temperature: -40° C to +85° C Relative Humidity: 5% to 95%, non-condensing Wind Load: 62 N (Front) at 200 km/h
- Mechanical LED Indicators: Power On, Ethernet Link, Signal Strength Size (L x W x H): 7.4 x 7.4 x 2.2 in (18.5 x 18.5 x 5.6 cm) Shipping Weight: <7.7 lb / 3.5 kg
- Wireless Radio EIRP: NWK1[IC]/M (FCC, IC): Up to +36 dBm for point-to-multipoint deployments, +42 dBm for point-to-point deployments with MAC-lock feature enabled NWK2/M (ETSI): +30 dBm RF Output: +26 dBm Rated Transmitter Operational Frequency: 5180 MHz - 5825 MHz, region-dependent (contact ComNet for supported frequencies) Bandwidths: 20, 40, and 80 MHz
- Standard Internal Antenna Type: Internal 16 dBi Dual Polarized Directional Gain: 16 dBi Azimuth: 30° Horizontal/Vertical Elevation: 30° Horizontal/Vertical
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.