Comnet, CNMC2+1SFP, Hardened 2 Channel Media Converter 2 RJ45 to 1 SFP Optic
Features:
- Optical port supports 100/1000 Mbps full duplex data
- Full-duplex transmission of 10/100/1000 Mbps Ethernet
- Ethernet Ports:
- 2 x 10/100/1000BASE-TX electrical ports
- 1 x 1000BASE-FX or 100BASE-FX optical port (with suitable ComNet SFPs)
- 10/100/1000 BASE-TX port supports auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation
- Uses customer-installed ComNet SFPs for wide compatibility with optical fibers, connector types, and transmission distances up to 120 km
- Link Fault Pass-Through detects copper port failures and triggers optical port state change to notify head-end
- Environmental & Electrical Protection:
- Complies with NEMA TS-1/TS-2 and Caltrans traffic control environmental specifications
- Voltage transient protection on all power and signal input/output lines
- LED status indicators confirm operating status
- Plug-and-play design with no electrical or optical adjustments required
- Mechanical & Usage Features:
- Full size units have contact closure output for remote side link failure detection
- Standard size is hot-swappable rack module
- Standard size interchangeable between stand-alone or rack mount use (ComFit)
- IEEE 802.3 compliant
Applications:
- Optical transmission of Ethernet-compatible industrial security access control systems, intercom systems, VOIP (Voice over IP) telephony networks, and IP-compatible CCTV camera surveillance networks
- Optical Ethernet transmission to wireless LAN access points
- Optical transmission of any Ethernet-compatible equipment with a maximum data rate of 100/1000 Mbps
The ComNet Ethernet CNMC2+1SFP electrical-to-optical Ethernet media converters accept two 10/100 or 1000 Mbps electrical inputs and converts this to a single 100 or 1000 Mbps optical output (selected by a DIP switch) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. "Auto-Negotiating" is supported on the copper interface side. These devices use either one or two optical fibers, depending upon the selection of sold-separately SFP* optical module. The ComNet exclusive Demux feature allows for port isolation, replicating two media converters over one fiber. The ComNet exclusive Mux feature prevents network video flooding of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink path. The CNMC2+1SFP series can be powered by wide range of AC or DC input power supplies.