Buy ComNet CNGE2MCPOEM, 10/100/1000 Mbps Ethernet 2 Port Media Converter

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Comnet, CNGE2MCPOEM, 10/100/1000 Mbps Ethernet 2 Port Media Converter + PoE.

Features with all optional accessories:

Optical port supports 1000 Mbps full duplex data
10/100/1000 Mbps Ethernet,10/100/1000 BASE-T/TX electrical port, 1000 BASE-FX optical port
LED Indicators
IEEE 802.3 compliant
Electrical port supports Auto-Negotiation for 10 Mbps, 100 Mbps or 1000 Mbps, full duplex or half duplex data.
IEEE 802.3at Class 1 – 4 Power over Ethernet (PoE)
Distances up to 120 km with optional SFPs
Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately)

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Data
Data Interface	Ethernet
Data Rate	10/100/1000 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port
Electrical	30W (max)
Fibers	SFP Dependent
Fiber Connectors	Requires selection of sold-separately SFP modules. See ComNet data sheet for number and description of SFP modules
Connectors	Power - Terminal Block Electrical - RJ45
PoE pin assignment	RJ45 port #1 supports IEEE 802.3at Class 1 – 4 End-point Positive (VCC+): RJ45 pin 1, 2 Negative (VCC-): RJ45 pin 3, 6
Indicating LEDs	Optical Link/Data Activity Power PSE
Operating Power	48VDC
Electrical & Mechanical
Current Protection:	Automatic Resettable Solid-State Current Limiters
Circuit Board	Meets IPC Standard
Environmental
MTBF	>100,000 hours
Operating Temp	-40 C to +75 C
Storage Temp	-40 C to +85 C
Relative Humidity	0% to 95% (non-condensing)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Data
Data Interface	Ethernet
Data Rate	10/100/1000 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port
Electrical	30W (max)
Fibers	SFP Dependent
Fiber Connectors	Requires selection of sold-separately SFP modules. See ComNet data sheet for number and description of SFP modules
Connectors	Power - Terminal Block Electrical - RJ45
PoE pin assignment	RJ45 port #1 supports IEEE 802.3at Class 1 – 4 End-point Positive (VCC+): RJ45 pin 1, 2 Negative (VCC-): RJ45 pin 3, 6
Indicating LEDs	Optical Link/Data Activity Power PSE
Operating Power	48VDC
Electrical & Mechanical
Current Protection:	Automatic Resettable Solid-State Current Limiters
Circuit Board	Meets IPC Standard
Environmental
MTBF	>100,000 hours
Operating Temp	-40 C to +75 C
Storage Temp	-40 C to +85 C
Relative Humidity	0% to 95% (non-condensing)

Note: Please read description carefully. Do not base your order on the picture presented.