Clear-Com, FSII-BP19-X4-O2-US, FreeSpeak II 1.9 GHz, 4-Pin Wireless Beltpack for High Pressure Environments XLR-4M Headset Connector Approved for Use in USA and Canada
Features:
- Beltpack
- Functions with FreeSpeak BASE-II, FreeSpeak Edge Base, Arcadia Central Station and Eclipse HX via E-IPA cards
- 1.9, 2.4 and 5.0 GHz beltpacks operate on a single system
- Supports up to 200 beltpacks on a single system
- Encoder Volume Swap between A&C and B&D
- "Listen Again" message replay
- Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
- Over-the-air beltpack registration
- Connectivity
- 1.9 GHz radio frequency
- Typical range 300ft (90m), outdoor range 800ft (240m)
- Robust radio link works in high multipath or reflective environments
- Mechanical
- IP53 rating for wet and dusty conditions
- 18+ hour battery life or USB port for continuous operation
The FSII O2 1.9 GHz beltpack is specifically designed to work in Hyperbaric chambers safely, operating at atmospheric pressures of 5.1 atm, 517 kPa, or 75 psi with a change of +/- 26 psi per minute without damage.
Operation
The FSII-BP19-02 can connect to the FreeSpeak II Base Station, FreeSpeak Edge Base Station, Arcadia Central Station or to the Eclipse® HX matrices using the E-IPA-HX interface card. FSII-BP19 users can roam seamlessly between either FSII-TCVR-19 or FSII-TCVR-IP-19 transceivers over wide areas. The "Listen Again" feature allows users to replay earlier commands, eliminating the need to repeatcommunication or disturb productions. Volume Swap allows for independent level control on channels A, B, C, and D listens.
Increase System Size
The FSII-BP19-X4-O2 can be used interchangeably with any other FreeSpeak II or FreeSpeak Edge beltpack on the same system. Depending on what system you connect to, you can increase the quantities of beltpack users that operated on a single system.
Durability
The FSII-BP19-X4-O2 is IP53 rated for water and dust protection with special components to withstand depths of 125 ft (38 m). For better grip and protection, the beltpack has a rubberized over-mold to protect it from the most rugged environments.
Battery
The FSII-BP24-X4-O2 beltpack does not support the AC60 battery like the FSII-BP19 and FSII-BP24 beltpacks. Because this beltpack is used in high-pressure environments, the FSII-BP19-X4-O2 will only support the use of three AA alkaline or rechargeable Nickel Metal Hydride batteries. Beltpack battery level settings will accommodate to the use of these batteries.
For more information, please see 
Data Sheet
