Brand NewChip Quik, AD1-10S, Thermoset Chip Glue, Stencil/Print Viscosity, Red, 10cc Syringe
Features:
Heat curing epoxy adhesive designed to bond surface mount chips and ICs to printed circuit boards (PCBs). Higher Viscosity for Stencil Printing. Designed to be printed with stencil and squeegee.
Allows large/heavy surface mount components to be permanently bonded to a PCB during reflow, allowing two sided surface mount reflow without larger chips/ICs coming loose.
Chip Quik AD1 Red Glue Usage Instructions
Chip Quik AD1 Red Glue only works as an adhesive after it has been applied between a part and the PCB, then baked in a reflow oven (which cures the AD1 Red Glue), and then cooled. Before it has been heated (cured), it is slightly sticky, but will not hold parts in place. Once baked and cooled, upon additional reflow cycles, the cured AD1 Red Glue will stay hardened and will help hold heavier parts in place while the solder alloy joints melt and then re-solidify during secondary reflow.
How to Apply and Cure Chip Quik AD1 Red Glue
Alternatively, you can switch the order to bottom side first, then top side. Usually, you want to first reflow the side with the lightest components, and reflow the heaviest part side second.
There are currently no reviews for this product. You can leave the first review and share your experience.