Aten CE350 PS2 KVM Extender

In the Box

• ATEN CE350 PS/2 KVM Extender
• 6' Custom PS/2 KVM Cable Set
• 2 x Power Adapter
• Rack Mount Kit
• 2 x Grounding Wires

The Aten CE350 PS/2 KVM Extender is a PS/2 based KVM Extender with automatic signal compensation and RS-232 serial functionality, allowing access to a computer system from a remote PS/2 console (PS/2 keyboard, monitor, and PS/2 mouse). Because it allows access to a computer system from a remote console, the CE350 is geared towards use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location - away from the dust and dirt of a factory floor, or the harsh environmental influence of a construction site, for example. This allows you to deploy system equipment over distances up to 500'.

Local and Remote Units connect at distances up to 500 feet using CAT 5e cable Adjustable gain control - manually adjust signal strength to compensate for distance Dual console operation - control your system from both the local and remote PS/2 keyboard, mouse and monitor consoles Built-in ASIC for greater reliability and compatibility Auto Signal Compensation (ASC) and storage of settings RS-232 serial ports - connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud rate 115200 bps) Audio Enabled - supports stereo speakers and microphone Pushbutton operating mode selection (Local Unit only) - select between Local and Auto operating modes, with the press of a single button Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection Superior video quality - 1920 x 1200 @ 60Hz 100', 1600 x 1200 @ 60Hz 500' No loss in audio quality at 500 feet Supports Wide Screen formats Note: The EDID data for a widescreen is sent from the local video output port. For widescreen modes and displays connect the monitor to the local video output port or use an optional EDID emulator. Supports VGA, SVGA, SXGA (1280 x 1024), UXGA (1600 x 1200), WUXGA (1920 x 1200) and multisync monitors; local monitor supports DDC; DDC2; DDC2B Hot pluggable Rack Mountable no software required - connecting cables to the devices is all it takes