ATC Diversified VCFP96M Multifunction/Power Meter
Brand New
Manufacturer warranty Description
Automatic Timing & Controls Diversified, VCFP96M, Multifunction/Power Meter
Features:
- 3Ø True RMS (Voltage/Current)
- 3Ø Power (Active, Reactive, Apparent), Energy (Active, Reactive, Apparent)
- Programmable CT/PT Primary/Secondary
- CT Polarity Error Detection
- Variable Pulse Width Selection
- Single Phase Network with Phase Selection
- Modbus RTU Communication (RS485)
- Neutral Current Measurement
- THD Up to 31st Level
- Single Pulse Output/Demand Phase Sequence Detection
The VCFP96M is a complete single phase and three phase digital metering system suitable for low, medium and high voltage control panels, gensets, load banks, building management systems and power management systems. The VCFP96M can be used on single phase, three phase three wire as well as three phase four wire balanced or unbalanced systems. The six easy to access front control keys are used for scrolling up or down through the parameters being measured and displayed such as voltage, current, power factor, power (active, reactive, apparent), energy and frequency. Output specifications include pulse output and RS485 Modbus RTU communication protocol compatible with PC, PLC, RTU, data loggers and SCADA programs.
For more information, please see 
Data Sheet
Technical details
- Weight 318 gms
- Transmission Distance 500 meter maximum
- Frequency 45 to 65Hz
- Accuracy Voltage (L-N / L-L): ±0.5% of F.S. Power Factor ±0.01 Current ±0.5% F.S. Frequency: ±0.1% For L-N Voltage >20V For L-L Voltage >35V Power (Active, Reactive, Apparent): 1% Energy (Active, Reactive, Apparent): Class 1
- Mounting Panel mount
- Electrical Connection 3Ø - 3 wire 3Ø - 4 wire 2Ø - 3 wire 1Ø - 2 wire
- Transmission Mode Half duplex
- Power Consumption 8VA Max
- Resolution For energy: 0.01k, 0.1k, 1k, 0.01m, 0.1m, 1m (depending upon CT ratio x PT ratio) For Power, Voltage, Current: Auto resolution For Power factor: 0.001
- Supply Voltage 100 to 240V AC, -15% +12%, 50/60 Hz, (±5%)
- Temperature Operating Temperature: -10 to 55°C Storage Temperature: -20 to 75°C
- Response Time 100 ms (max and independent of baud rate)
- Input Voltage Range 11 to 300V AC, (Phase to Neutral) 19 to 519V AC (Phase to Phase)
- Input Current Range Nominal 5A AC (Min-11mA, Max-6A)
- Display Scrolling Automatic / Manual (Programmable)
- Display Reset Programmable (For energy)
- Memory Retention 10 years (For energy)
- Measuring Parameters Voltage (L-L / L-N) (Individual / Average), Current (I1, I2, I3) (Individual / Average), Frequency, Power Factor (Individual /Total), Active, Reactive & Apparent power (Individual / Total), Active, Reactive & Apparent Energy (Total), Demand (Min / Max Active Power, Min/Max Reactive Power, Max Apparent Power), %THD up to 31st Level Max Demand Current, Neutral Current, Phase Sequence Detection
- Pulse Output Voltage Range: External 24V DC max Current Capacity: 100mA max Pulse Width: 100 ms ± 5 ms
- Communication Interface and Protocol RS485 and MODBUS RTU
- Communication Address 1 to 255
- Transmission Speed 300, 600, 1200, 2400, 4800, 9600, 19200 (in bps)
- Parity None, Odd, Even
- Stop Bits 1 or 2
- CT Primary 1/5A to 10kA (Programmable for any value)
- CT Secondary 1/5A (Programmable)
- PT Primary 100V to 500kV (Programmable for any value)
- PT Secondary 100V to 500V (Programmable for any value)
- Humidity (Non-Condensing) Up to 85% RH
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.