ATC 365M-300-T-35-PX 365M Long-Ranger Computing Timer 24 VAC

ATC, 365M-300-T-35-PX, 365M Long-Ranger Computing Timer with Memory, 0 to 9.99, or 99.9 or 999 Seconds, Minutes, or Hours, 24 VAC, 50-60 Hz, Selectable Timeup & Stop or Timedown & Go with Display, Standard, Basic Plug-in Unit

Features:

• EEPROM Memory
• Magnetic Latching Relay
• Switch Selectable Sec., Min. or Hrs. Ranges
• Nine Ranges 0 to 9.99, 99.9 or 999
• High Accuracy & Noise Immunity
• Easy Plug-In Housing
• High Intensity Blue Fluorescent Display
• Fully Gasketed and O-ring sealed to be dust and water-tight
• Timeup or Timedown Display Operation

Packaged in a 72mm² DIN housing, the ATC 365 is a true plug-in timer that can be replaced in seconds without disturbing the mounting housing or field wiring. Machine and process downtime is kept to a minimum.The 365M is also fully gasketed and O-ring sealed to be dust tight.

Wide Range

365 timer covers the overall span of 0.01 SEC to 999 HR, in nine switch-selectable ranges of 9.99, 99.9, or 999 Seconds, Minutes, or Hours.

Easy-to-Adjust Preset

ATC's unique three rotary switches for easy setting and adjustment of the preset time is an industry standard. The switches can be adjusted anytime, even during a timing cycle. The timer is constantly scanning the preset setting and instantly re-computes the time cycle if a preset change is detected. This is especially valuable in the Timedown mode allowing you to shorten or abort the current timecycle without the removal of power.

Self-Calibrating

The microprocessor automatically calibrates the timer for 50 or 60Hz power operation, there are no switches or jumpers to set.

Programmable Display

An internal DIP switch can be set for Timeup or Timedown and Stop display operation There is a horizontal timing bar " " which appears to the right of the display and blinks once per second during timing and rapidly at timeout. At left, a timed out symbol " " blinks after time-out indicating when the magnetic delayed relay is latched.

Magnetic Latch Relay

The 365 utilizes a unique magnetic latch delayed relay which energizes, latches, at time-out. Once latched it will not unlatch even with power removed or the unit is unplugged from the housing. It will only unlatch when power is momentarily applied to the Reset, terminal 16.

Non-Volatile Memory

An EEPROM memory chip to retain the time value during a loss of power and continues timing when power is restored. No battery is required.

For more information, please see Data Sheet