Buy Ashly NX4004, Multi-Mode Power Amplifier, 4 x 400W

info@PrimeBuy.com

1-855-969-9322
1-908-282-3332 (Intl.)

Ashly Audio, NX4004, Ashly NX4004 Multi-Mode Power Amplifier, 4 x 400 Watts, 2/4/8 Ohms or 25V/70V

Features:

Rear panel DIP switches select low impedance (2, 4, and 8 Ohm), constant voltage (70V or 100V), high pass filter, limiter and input gain on each channel
Ashly Energy Management System (EMS) for increased efficiency) automatic <1Wsleep-mode (defeatable)
Switch mode power supply automatically detects 120V or 240V AC operation
Extensive protection circuitry
Continuously variable cooling fans
Front panel power switch and level controls (can be disabled for security)
Multiple internal power supplies provide increased channel separation and reliability
Remote DC level control on each input channel (2 RU models only)
Genuine Neutrik connectors on 2 RU models for security, safety, and reliability
Safety / Compliance: cTUVus, CE, FCC, RoHS

nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V).

For more information, please see Data Sheet

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Ashly Audio items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Voltage Gain

Selectable at 26dB, 32dB, 38dB, or 1.4V

Damping Factor

>250 (8 Ohms load <1kHz)

Input High Pass Filter

80Hz 2nd order

Distortion (SMPTE, typical)

<0.5%

Distortion (THD-N, typical)

<0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)

Channel Separation

-75dB (dB from full output, 1kHz)

Signal to Noise (20Hz-20kHz, unweighted)

>105dB

Frequency Response

20Hz-20kHz, +/-0.05dB

Balanced Input Connector

Euroblock 3.5mm, 1/4" TRS and XLR Combo jack

Input Impedance

10k Ohms

Maximum Input Level

+21dBu

Speaker Output Connector

Neutrik speakON

Remote DC Level Control

Euroblock 3.5mm - Gnd, CV, V+ per input

Attenuators (per channel)

Front panel and remote. Fully off = Mute

Amplifier Protection

Inrush current limitation
temperature monitoring
output over-power protection
mains fuses

Airflow

In through sides, Out through front

Cooling

Continuously variable temperature controlled axial fan(s)

Environmental

32-113 deg F, (0-45 deg, C) (noncondensing)

Nominal (Automatic Sensing SMPS)

110 - 120VAC/220 - 240VAC

Operating Range

70 - 135VAC/140 - 270VAC

Minimum power-up

85VAC/170VAC

Power Cable Connector

20A powerCON (32A powerCON 3.04 model only)

Unit Weight

25.2lbs (11.4kg)

Unit Dimensions

19"W x 3.5"H x 16.84"D (483mm x 89mm x 428mm)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Voltage Gain

Selectable at 26dB, 32dB, 38dB, or 1.4V

Damping Factor

>250 (8 Ohms load <1kHz)

Input High Pass Filter

80Hz 2nd order

Distortion (SMPTE, typical)

<0.5%

Distortion (THD-N, typical)

<0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)

Channel Separation

-75dB (dB from full output, 1kHz)

Signal to Noise (20Hz-20kHz, unweighted)

>105dB

Frequency Response

20Hz-20kHz, +/-0.05dB

Balanced Input Connector

Euroblock 3.5mm, 1/4" TRS and XLR Combo jack

Input Impedance

10k Ohms

Maximum Input Level

+21dBu

Speaker Output Connector

Neutrik speakON

Remote DC Level Control

Euroblock 3.5mm - Gnd, CV, V+ per input

Attenuators (per channel)

Front panel and remote. Fully off = Mute

Amplifier Protection

Inrush current limitation
temperature monitoring
output over-power protection
mains fuses

Airflow

In through sides, Out through front

Cooling

Continuously variable temperature controlled axial fan(s)

Environmental

32-113 deg F, (0-45 deg, C) (noncondensing)

Nominal (Automatic Sensing SMPS)

110 - 120VAC/220 - 240VAC

Operating Range

70 - 135VAC/140 - 270VAC

Minimum power-up

85VAC/170VAC

Power Cable Connector

20A powerCON (32A powerCON 3.04 model only)

Unit Weight

25.2lbs (11.4kg)

Unit Dimensions

19"W x 3.5"H x 16.84"D (483mm x 89mm x 428mm)

Return and Warranty

Please note that return requests for Ashly Audio items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Ashly NX4004 Multi-Mode Power Amplifier, 4 x 400W

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews