| Digital Video Input | HDMI 2.0, DVI-D (through adapter), Dual-Mode DisplayPort (DP++) (through adapter) |
| Analog Video Input | HD-15 VGA |
| Video Outputs | Network video over Ethernet via RJ45 port or SFP via 1G SFP |
| Formats | HDMI 2.0, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP 2.2 content protection support, RGBHV. DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter |
| Progressive Input Resolutions | Supports 4K30 4:2:0 and most common HD resolutions up to 1920x1200.HDMI and DVI (Progressive)- Pixel clock between 27 MHz – 300MHz
- Minimum resolution of 720x480p60
- Maximum horizontal resolution of 4096 or a vertical resolution of 2160*
- Common acceptable resolutions include:
- 720x480p60 – 480p, 720x576 at 50, 800x600p60,
- 1024x768p60, 1280x720 at 60Hz - 720p60,
- 1600x1200 at 60Hz, 1920x1080 at 60Hz - 1080p60,
- 3840x2160(4:2:0) at 30Hz - UHD30 aka 4K30,
- 4096x2160(4:2:0) at 30Hz - DCI 4K30
|
| Interlaced Input Resolutions | Supports 1080i60.HDMI and DVI (Interlaced)- 1920x1080 at 50Hz - 1080i50
- 1920x1080 at 60Hz - 1080i60
Note: Interlaced resolutions will be de-interlaced ifscaled on the decoder; otherwise, the interlaced signalwill pass through to the display |
| Analog Input Resolutions | Supports most common HD up to 1920x1200. See Data Sheet for details. |
| Analog-To-Digital Conversion | 8-bit 165 MHz per each of three color channels |
| Color Space | 4:4:4 – HD (1920x1200 and lower) |
| LocalPlay/HostPlay | 8 playlists |
| HostPlay | 1 image/list |
| Note | Jumbo Frames Required |
| Audio |
| Input Signal Types | Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) |
| Output Signal Types | Ethernet |
| Analog Audio Formats | 8ch PCM, Stereo 2-channel |
| Analog-to-Digital Conversion | 16-bit 48 kHz |
| Input Signal Types | Embedded audio on HDMI (DVI-D through adapter) orAnalog Stereo |
| Latency |
| Latency | - 17-ms at 60 fps for 1920x1080 and lower resolutions
- 34-ms at 30 fps for 4K30
NOTE: This is the combined encode plus decodelatency. Total latency from source to screen will alsoinclude any network latency.Scaling adds one frame of latency (17ms at 60fps) |
| Switching | Up to 1.5s delay, not seamless |
| Bandwidth |
| Bandwidth | - 200 Mb/s (average)
- Note: Bandwidths can be as high as 700 Mb/s, depending on the resolution and the amount of motion in the video content.
- Note: Minimum bandwidth is 50 Mb/s for resolutions <= 1080p60
|
| Communications |
| Ethernet - PO | 10/100/1000 Mbps, auto-negotiating, auto-sensing,full/half duplex, DHCP, Auto IP, and Static IP |
| Ethernet - P1 | 1 Gbps port which accepts compatible fibertransceivers or direct attach cables, DHCP, Auto IP, andstatic IP |
| HDMI | HDCP, EDID management |
| Ports |
| P0 | 8-wire RJ45 female10/100/1000 Mbps 10/100/1000 Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders |
| HDMI IN | HDMI video input |
| VGA IN | DB15 analog input |
| USB IN - Host | USB-B host input |
| USB IN -Maintenance | USB-Mini maintenance input |
| Controls and indicators – front panel |
| Reset button | - Recessed pushbutton.
- Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
|
| Power LED | On solid (green) when operating power is supplied (viaPoE). |
| Audio LED | On (green) when audio is transmitting. |
| Analog Video LEDs | On (green) when analog source is available andtransmitting. |
| Power supply |
| Power over Ethernet | Can be powered via a PoE switch or other equipmentwith a PoE source. Conforms to IEEE 802.3af Class 3(802.3at Type 1). Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder. |
| Note | In order for the unit to receive Power over Ethernet(PoE), it must be connected to a switch or otherequipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only |
| Environmental |
| Temperature (Operating) | 32° to 104°F (0° to 40°C) |
| Temperature (Storage) | -22° to 158°F (-30° to 70°C) |
| Humidity (Operating) | 10% to 90% RH (non-condensing) |
| Humidity (Storage) | 0% to 90% RH (non-condensing) |
| Heat Dissipation | Up to ~26 BTU/Hr |
| General |
| Dimensions (HWD) | 4.06” x 3.5” x 2.25” (10.31 cm x 8.84 cm x 5.72 cm) |
| Weight | .75 lb (0.34 kg) |
| Airflow | Natural convection via vent openings on front, back,and top |
| Regulatory Compliance | FCC, CE, and NTRL |
