Amx FGN1222A-SA NMX-DEC-N1222A Compression Video Over IP Decoder
Brand New
Manufacturer warranty Description
AMX, FGN1222A-SA, NMX-DEC-N1222A N1000 Series Stand Alone Minimal Proprietary Compression Video Over IP Decoder with PoE, AES67 Compatible
Features:
- Output Scaling - Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity
- 1 Frame Latency - Same as HDBaseT
- Minimal Proprietary Compression (MPC) - Visually lossless MPC algorithm
- Optional Compression - Available option to disable all compression
- Power Over Ethernet (PoE) - PoE eliminates the need for power supply
- Infrared (IR) - Infrared emitter connection allows control of low-cost, IR-only display devices
- Onboard Control - All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
- Unmatched Flexibility - Highly competitive pricing for matrices up to 32x32, or higher with the help of design experts
- Two RJ45 Ports - Decoder features two RJ45 network ports (one PoE)
- Stand Alone or Card - Available as a stand alone device, or card for use with NMX-ACC-N9206
The new NMX-DEC-N1222A model features improved digital pixel reproduction and reduces latency to an industry leading 10-ms for gigabit links. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly.
The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2x1 seamless presentation switcher up to a mid-size video matrices, particularly in scenarios that require imperceptible latency.
The N1000 Series Encoders and Decoders are an affordable local AV over IP swiching solution that utilizes off-the-shelf network switches.
Common Applications
The NMX-DEC-N1222 is the perfect solution for any low-latency application such as live in-room presentations in conference rooms and classrooms.
For more information, please see 
Data Sheet and User Manual
Technical details
- Weight 1.47 lbs (0.67 kg)
- Regulatory Compliance FCC, CE, and NRTL
- IR 2-pin terminal Phoenix connector Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- Type Decoder
- Temperature 32° to 104°F (0° to 40°C)
- Video Output HDMI, DVI-D (through adapter)
- Audio 5-pin terminal Phoenix connector Provides user-selectable balanced/unbalanced output Dedicated audio output.
- Humidity 10% to 90% RH (non-condensing)
- HDMI HDCP, EDID Management
- Reset Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings.
- Video Latency 10 ms at 60 fps
- RS232 3-pin terminal Phoenix connector Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200- 115200 baud rate.
- Note Video and audio latency values are the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Scaling adds one frame of latency (17ms at 60fps).
- Power LED On solid (green) when operating power is supplied (via PoE or local power supply). This activity is also shown by the PWR LED on the rear panel
- Status LED On flashing (green) when there is software activity. This activity is also shown by the STAT LED on the rear panel.
- HDMI Audio Formats 8ch PCM
- Heat dissipation Up to ~ 44 BTU/Hr
- Dimensions (HWD) 1.05” x 7.888” x 5” (2.67 cm x 20.04 cm x 12.7 cm)
- Digital Video Input Network video over Ethernet via RJ45 ports
- Output Resolutions Supports most common HD up to 1920x1200
- Formats HDMI, DVI-D (through adapter), HDCP content protectionsupport
- Input Signal Types Network video over Ethernet via RJ45
- Output Signal Types Embedded audio on HDMI or DVI-D (through adapter) Ethernet standard SVSI audio stream or AES67 (user selectable)
- Analog Audio Format Stereo 2-channel
- Digital-to-Analog Conversion 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encodersettings)
- Audio Latency Standard SVSi audio stream = 17-msec (synched to video) ;AES67 = <1-msec adjustable to 17-msec
- P0 10/100/1000 Mbps, auto-negotiating, auto-sensing, PoE,full/half duplex, DHCP, Auto IP, and Static IP, 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port with PoE Provides network connection and power to the Encoders and Decoders
- P1 10/100/1000 Mbps, auto-negotiating, auto-sensing,full/half duplex, DHCP, Auto IP, and Static IP, 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto sensing gigabit Ethernet switch port
- +12V 2A One 12 Volt DC power input
- HDMI OUT HDMI video output
- ID button Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- PWR LED Same as POWER LED described above.
- HDMI LED On (green) when there is a connection to a valid video source
- STAT LED Same as STATUS LED described above.
- STRM LED On (green) when the unit is streaming video.
Reviews.
There are currently no reviews for this product. You can leave the first review and share your experience.