Brand NewWARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm.. For more information go to www.P65Warnings.ca.gov
Altelix, NP171406VMA1C, 17" x 14" x 6" Polycarbonate + ABS Vented Indoor / Outdoor RF Transparent Enclosure with PVC Non-Metallic Equipment Mounting Plate, 120 VAC Outlets and Power Cord
NP171406VMA1C Includes Only:
Features:
Applications:
The Altelix NP171406VMA1C Vented Polycarbonate + ABS NEMA Weatherproof Enclosure with 120VAC Power and Non-Metallic Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These Enclosure are molded out of UV-resistant PC+ABS, a high-tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS Enclosure are superior to ABS Enclosure because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.
Power
This configuration consists of the PC+ABS NEMA enclosure with a hinged lid and a 1/4" thick non-metallic PVC plate with two 120VAC power outlets. A 5-foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. The enclosure can also be hard wired by an electrician or qualified installer. An external ground lug is provided. Two cable grommets on the enclosure allows cables to be connected to internal devices. Knock-outs are provided on the enclosure for additional wiring. Extra cable grommets are included with the accessory kit.
Ventilation
This enclosure features two 3-inch air vents with cleanable screens. Rain shields help prevent rainwater from entering the enclosure.
No-Drill Non-Metallic Equipment Plate
This configuration consists of the PC+ABS enclosure with a hinged lid and a 1/4" thick non-metallic PVC plate for mounting and securing equipment. Due to the "No-Drill" design of this PVC plate, mounting radios and other equipment can be done simply by using self-tapping screws.
RF Transparent Design
The NP171406VMA1C is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless points on the market.
Mounting
The enclosure can be wall-mounted using the included wall anchors.
There are currently no reviews for this product. You can leave the first review and share your experience.