Features:
- 380 Lines of Resolution used with 2-Wire Qwikbus Series Systems Only
- All KMD60 camera modules are 3.94"w x 3.94"h (100mm x 100mm), and are made to snap into the MT series modular panel trim frame(s). These cameras are designed to operate in a temperature range of 14°F (-10°C) to 122°F (50°C).
- All KMD60 camera modules have a vertical swivel of approx. +/- 70°, and a horizontal swivel of approx. +/- 70° and feature a 1/3" SHARP CCD sensor.
- Recommended mounting height to center of camera lens is approx. 5 feet (1.55 meters) from finished floor.
- To service the KMD60 series camera modules, once installed, use the model 13510 key / tool unit.
The KMD60 series color camera modules are designed to be used with Alpha Communications® / S.T.R.™ modular series door entry stations. All models feature a 3.6mm lens and 92 degree angle of view (side to side) and 700 lines of resolution. The KMD60 features a luminous sensitivity of 0.1 Lux and in order to obtain optimal color quality in daytime operation, an IR blocking filter is connected. In the dark, this filter moves aside and the camera switches to Black and White. The built-in IR LEDs ensure optimal illumination in the close-up range. Either 4 White LEDs or 8 IR LEDs ensure optimal illumination in the close-up range, and to prevent the camera from fogging up, even at low temperatures.
Color camera module(s) shall be Alpha Communications® / S.T.R.™ QwikBUS™ KMD60 series or approved equal. Camera module(s) shall snap into the corresponding MT series modular panel frame(s).
Camera module(s) shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix-B), and shall feature a 3.6mm lens, 92 degree angle of view (side to side) and 700 lines of resolution. Camera module shall also feature built-in Infrared Illuminators. Recommended mounting height to center of camera lens is approx. 5 feet (1.55 meters) from finished floor. Camera modules shall have a vertical swivel of approx. +/- 70°, and a horizontal swivel of approx. +/- 70° and shall feature a 1/3" SHARP CCD sensor. Contractor shall observe all local and national electrical and building codes
