Alderon, 2012096, VersAlarm VA-03+A+C 2-Zone Alarm Gen2, WaterSpotter Flood Sensor, AWS Series - 15' Cable, 15' Altra Narrow Angle Control Switch, Normally Open, 120/240VAC, 5A Gold, RubberLox Pipe Clamp
Features:
- Power LED - A green LED illuminates (solid) on the front of thealarm panel to indicate the power is on.
- Alarm LED - During an alarm condition in zone-1, the red alarm 1LED will illuminate (solid) on the front of the alarm panel. During an alarmcondition in zone-2, the red alarm 2 LED will illuminate on the front ofthe alarm panel.
- Alarm Buzzer - The alarm buzzer will annunciate (solid) in additionto the visual indication provided by the red alarm LEDs during an alarmcondition in either or both, zone-1 and zone-2.
- Alarm Test Pushbutton - Press the pushbutton to test the alarm toensure proper operation. The buzzer should annunciate, alarm LEDsshould illuminate, and auxiliary contacts should activate.
- Alarm Silence Pushbutton - Press the pushbutton to silence thebuzzer during an alarm condition. The alarm LEDs remain illuminateduntil the alarm condition has been cleared and the alarm panel will autoreset for the next alarm cycle.
- Sensor Inputs - Connect a field-installed sensor to the terminalsfrom the monitoring area.
- Auxiliary Contacts - Interface with an external device, includingBAS systems and phone dialers. The normally open dry contacts canswitch 24VDC, 500mA maximum (each).
- Battery Backup - Install a 9VDC battery (not included) for batterybackup during power outages. The power LED will not illuminate duringbattery backup mode to conserve battery power.
- Panel Access - Pull the cover off to access the panel, which includesan open wiring compartment to safely route wires while connectingsensors and auxiliary dry contacts.
For more information, please see 
Data Sheet
