Advanced Systems & Designs, 600-26-MTI, Digimatic FlashCable for Fowler Sylvac Ultra-Cal, Starrett 797
Features:
- A data send button on the gage
- A footswitch connected to the FlashCable®
- A footswitch connected to the GageMux®
- Software commands of the GageMux®
- Digimatic output FlashCable® for gages using optic coupling signal connector
- Sends data to GageMux® or devices that recognize the Digimatic Signal
- Several options to trigger data
The FlashCable® output can be directly connected to the GageMux® or any other device that recognizes Mitutoyo Digimatic signals. The Advanced Systems & Designs FlashCable® has programmable memory - and is configured to plug and play with your gage. Stored within the programmable memory of the FlashCable® is critical gage control information such as gage ID, FlashCable® serial number, and configuration date.
The FlashCable® gage interface does not obtain any power from the gage. When connected to the GageMux®, pin 9 of the 10-pin input port provides the power to the FlashCable®. When using connecting devices other than the GageMux®, make sure pin 9 has a 5V supply when connecting the FlashCable® interface.
When the FlashCable® is connected to the GageMux®, the LED on the FlashCable® turns GREEN. This indicates that the FlashCable is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
Applicable Gages:
- Bowers Micrometer, Brown & Sharpe Micrometer, Euro-Cal III Caliper, UltrapCal IV Caliper, Mark IV, Mark V, Mark II Bore Gage, S_Cal Calipers, Sylvac Calipers, Syvac Gages with Paddle, Sylvac Series 213 indicators, Digital Ultra-Height Gage, Holematic MarkII, XT Holematic and HoleMikes, MiniVertical Series II, Starrett 781 Accubore, Starrett 782 Micromerter, Starrett 797 Caliper, Mahr 25 ES / 27 ES / 31 ES / 32 ES, Mahr 106 ES, Mahr 1082, Mahr Digimar M 814, Multimar 25 ES, MarTool 106 ES
