Advanced Systems & Designs, 600-22-SCIENZSA-MTI, Digimatic FlashCable for Scientech Zeta Series Balance
Features:
- Digimatic output FlashCable for Scientech Zeta Series Electronic Balance
- Sends data to GageMux or devices that recognize the Digimatic signal
- Several options to trigger data
Sends data to GageMux multiple input interface or similar devices.This FlashCable gage interface is engineered to change the output on the Scientech Zeta Series Electronic Balance to an output in a Digimatic format. The 9-pin male connector on this Advanced Systems & Designs FlashCable connects to 9-pin RS-232 interface connector on the Scientech Zeta Series Electronic Balance. This FlashCable gage interface is designed to work with GageMux or other similar devices that recognize the Mitutoyo Digimatic signal.
The FlashCable gage interface does not obtain any power from the Scientech Electronic Balance. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable. If using devices, other than the GageMux, make sure pin 9 of the 10-pin connector provides a 5vDC supply to the FlashCable gage interface.
When the FlashCable gage interface is connected to the GageMux, the LED on the FlashCable turns GREEN. This indicates that the FlashCable gage interface is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
- Using the SEND button on the Scientech Zeta Series Electronic Balance
- Sending a gage read command from the computer to the Scientech Zeta Series Electronic Balance
- Using 300-1S in-line handswitch
- Using a Footswitch on the FlashCable (not included)
- Using the Footswitch on the GageMux USB (or equivalent triggering method on similar devices)
A detailed operation manual is included with this FlashCable gage interface. Advanced Systems & Designs normally sets the FlashCable gage interface to the default settings on the Scientech Zeta Series Electronic Balance. Make sure both the Scientech Electronic Balance and FlashCable gage interface are set to the same values. Refer to the Scientech Zeta Series Electronic Balance Setup and Operating Procedures for more information on external communication. Six foot standard cable length.