Brand NewAdvanced Systems & Designs, 600-22-SARTE2101-MTI, Digimatic Output FlashCable Gage Interface for Sartorius TE2101 Scale
Features:
Sends SPC data to GageMux USB.This FlashCable gage interface is engineered to change the output on the Sartorius TE2101 Scale to an output in a digimatic format. The special 25-Pin male connector on the Advanced Systems & Designs FlashCable gage interface connects directly to the 25-Pin female connector on the Sartorius TE2101 Scale.
This FlashCable gage interface is designed to work with GageMux gage interface or other similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the gage. When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable. If using devices, other than the GageMux, make sure pin 9 of the 10-pin connector provides a 5VDC supply to theFlashCable. When the FlashCable is connected to the GageMux, the LED on the FlashCable turns GREEN. This indicates that the FlashCable is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered using any of the following methods:
A detailed operation manual is included with this FlashCable gage interface. The communication parameters can be changed and reconfigured per requirements for both the FlashCable and the Sartorius TE2101 Scale. Advanced Systems & Designs normally sets the FlashCable to the default settings on the Sartorius TE2101 Scale. Make sure both the TE2101 Scale and FlashCable are set to the same values. Refer to the Sartorius TE2101 Scale user manual for more information on external communication. Six foot standard cable length.
There are currently no reviews for this product. You can leave the first review and share your experience.