Brand NewAdvanced Systems & Designs, 600-22-LWHRB-MTI, Digimatic FlashCable for LW Measurements HRB Scale
Features:
Send data to GageMux gage interface or other Digimatic input devicesThis FlashCable gage interface cable is engineered to change the output on the LW Measurements HRB Series High Resolution Electronic Balance to an output in Digimatic format. The 9-pin female connector on the Advanced Systems & Designs FlashCable connects directly to the male connector on the LW Measurements HRB Series Electronic Balance.
This FlashCable gage interface is designed to work with GageMux multiple-input interface or similar devices that recognize the Mitutoyo Digimatic signal. The FlashCable does not obtain any power from the LW Measurements HRB Series Electronic Balance.
When connected to the GageMux, pin 9 of the 10-pin input port provides the power to the FlashCable gage interface. When using interface devices other than the GageMux USB gage interface, pin 9 of the 10-pin connector must provide a 5V DC supply to the FlashCable gage interface. The LED on the FlashCable turns GREEN when the FlashCable is connected properly. The LED turns RED when the data is being sent or a data request is triggered.
The data transfer can be triggered by the following method:
Every FlashCable gage interface includes a detailed operation manual. The communication parameters are set to meet the requirements for both the FlashCable gage interface and the LW Measurements HRB Series High Resolution Electronic Balance. For communication to occur both the LW Measurements HRB Series Electronic Balance and FlashCable interface cable must be set to the same values. Please refer to the LW Measurements HRB Series High Resolution Electronic Balance operating manual for more information on external RS232 communication. Six foot standard cable length.
There are currently no reviews for this product. You can leave the first review and share your experience.